For Bashers, By Bashers!

You are browsing the "Killerbody" category archive.

Killerbody RC Warrior Crawler Body

Killerbody RC Warrior 1/10th Crawler Body

Inspired by the Ford M151 Mutt used in the Korean conflict and Vietnam war, the upcoming Warrior body from Killerbody RC has an incredible amount of scale detailing. 1.5mm thick polycarbonate is used to mold the body, and as you can see from the pictures, there are loads of scale accessories to dress it up just the way you like [...]

Read More...

Killerbody RC Marauder Crawler Body

Killerbody RC Marauder Crawler Body

New for all you scale/trail/crawling fanatics is the Killerbody RC Marauder. Inspired by the Land Rover Defender, the Marauder brings serious amounts of scale realism to the crawling world. To help toughen up the polycarbonate body, Killerbody designers came up with an innovative plastic reinforcement plate and the body was designed to be a great fit on the Axial SCX10. [...]

Read More...

Killerbody RC iHobby 2014

Killerbody RC at iHobby 2014

We have been lucky to spend some time with the people from Killerbody RC here at the big iHobby Expo. Killerbody has been making some waves with their highly detailed car and truck bodies, at the show they have a bunch of their goodies on display. In additional to their body line, they have scale detailing accessories, new brushless servos, [...]

Read More...

Killerbody RC Alfa Romeo TZ3 Corsa

Killerbody RC Alfa Romeo TZ3 Corsa

With the new Alfa Romeo TZ3 Corsa body from Killerbody RC, you can make that old beater car of yours go from ho-hum to heck-yes! Officially licensed by Alfa, the Killerbody TZ3 Corza captures all the detailing and elegance of the full scale car and comes in several different trim levels. You can get the Alfa as just a clear [...]

Read More...

Killerbody RC Lancia Stratos 1977 Giro d'Italia

Killerbody RC Lancia Stratos 1977 Giro d’Italia Body

Remember back in the mid-70s when the Lancia Stratos dominated the World Rally Championships? Nope, me neither, I was only 6 years old at the time. However, if you are into race cars then you know the Lancia has become an iconic car from the early days of rally racing. The people over at Killerbody RC have put out a very [...]

Read More...

Killerbody RC Rubik Monster Truck Body

Killerbody RC Rubik Monster Truck Body

Do you have a monster truck with a destroyed body? A monster truck just in need of a new look? If so, the folks over at Killerbody RC have a new monster truck body called the Rubik. The Rubik was designed to fit trucks like the Traxxas E-Maxx and is available in a wide variety of trim levels. You can [...]

Read More...

Killerbody RC Horri-Bull Crawler Body

Killerbody RC Horri-Bull 1/10 Crawler Body

One of the newest bodies announced by Killerbody RC is the Horri-Bull 1/10 crawler body. The Horri-Bull was designed to fit vehicles like the Axial Jeep Wrangler Rubicon and can help give your truck a unique look. The body is available in clear, painted/finished, or as a finished body with light buckets. Several different pre-painted colors are available from Killerbody, [...]

Read More...

Killerbody Alfa Romeo Traxxas XO-1

Killerbody RC 1/7 Alfa Romeo 8C Body for the Traxxas XO-1

There aren’t a whole lot of aftermarket body choices for the Traxxas XO-1 but the folks over at Killerbody RC are out to change that. They have previously released a Corvette body for the Traxxas high speed machine and now they have added an Alfa Romeo 8C body to their catalog. The Alfa was careful modeled after its full scale counterpart [...]

Read More...

Killer Body RC HobbyTown USA

Killerbody RC at the HobbyTown USA Convention

The crew from Killerbody RC was located in the main show area and had a bunch of new bodies on display. Perhaps the most impressive new product in the Killerbody line-up was their new Alfa Romeo body for the Traxxas XO-1 (the first two pictures in the gallery below). Body choices are pretty slim for the XO-1, so the big Alfa [...]

Read More...

killerbody_warrior_01

Killerbody Warrior 1:28 Scale 4WD – First Look

We have actually seen the 1/28th scale Warrior from Killerbody a few times over the last few months at various events, but only now were we actually able to borrow one of the prototypes for a few weeks and give it a good run. Before we always had to be ‘careful’ with it. This time around we were hitting other [...]

Read More...

Killer Body RC iHobby 2013

Killerbody RC at iHobby 2013

Killer Body RC is based out of the Chicago metro and are an O.E.M. of polycarbonate bodies, accessories, and both rc and die cast cars. The biggest news in their booth this year was the Warrior line-up of small Mini-Z sized off-road and on-road vehicles. The RTR Warriors are not shipping yet but should be a hit among the small [...]

Read More...

Killer Body RC Brake Disc

Killerbody RC Aluminum Brake Discs with Caliper

Whether you are looking for that extra touch of scale realism, or simply to up your bling factor, the new anodized aluminum brake discs from Killerbody RC should be right up your alley. Their brake discs are CNC machined and come in a wide variety of colors to match your ride. The brake discs are super easy to install and [...]

Read More...

traxxas_xo1_corvette_01

Killerbody RC – Traxxas XO-1 Corvette

I was recently hanging out at the Killerbody RC office, taking pictures and drooling over some of their new products coming out! We brought our Traxxas XO-1 along because we knew they had a new body for it that will be released soon! They have an officially licensed 1/7 scale Chevy Corvette GT2 body, and it looks amazing! There [...]

Read More...

Killer Body RC at Hobbytown USA convention

Killerbody RC at the 2013 HobbyTown USA Convention

One of the new exhibitors at the 2013 HobbyTown USA Convention was a company called Killerbody RC. Some of you industry types might know them by Sun Trade LTD which is based right down the road from us here in Chicago. Killer Body RC makes all types of licensed aftermarket bodies, from 1/28th scale all the way up to 1/7th scale. [...]

Read More...