Need a new car stand for your touring car or 12th scale pan car? The fine folks over at PROTOform have announced their latest and it looks pretty trick. Made from a tough alloy and power coated black, it makes your car easier to wrench on while making your pit spot look sano. Four rubber grommets are used to keep your car from sliding around, while four holes in the top are perfect for rebuilding shocks.
The part number is #6256-00 and they are street priced at $34. Hit up This Link to get complete details over on PROTOform’s official website.
What else has PROTOform been up to lately? Find out Right Here on BigSquidRC.
The PROTOform crew has announced two new bodies, the VRS-N, and the PFM-12.
The 200mm VRS-N pictured above is made for 1/10th scale nitro touring cars. The VRS-N incorporates an air management system inspired by full-scale touring cars. It has a low profile in the front and uses strategically placed airflow conditioners for the ultimate in aero efficiency. It has a part number of #1539-30 and is priced at $25.
The PFM-12 is pictured in the gallery below and is made to fit 1/12 pan cars running in the new GT12 class that is blowing up in the UK right now. Using inspiration from supercars, the PFM-12 utilizes a low-slung cab-forward design to give your 12th scale excellent handling. Its part number is #1613-30 and is priced at $25
To get more information on the VRS-N hit up This Link, for more information on the PFM-12 THIS is the link you want.
Welcome to Friday folks, how about a TGIF Mystery Link???
The crew over at PROTOform have announced new apparel so you can show your love for the hobby while out pulling trigger. The new apparel includes a Heritage t-shirt, an Aero Matters t-shirt, and a Champions zip-up hoodie for those colder days. The apparel is available in all the popular sizes with prices ranging from $16 to $53. Hit up THIS LINK over on the PROTOform website for more information.
Want more PROTOform news? Find it at THIS LINK on BigSquidRC.
If you’ve done any touring car driving, you have probably experienced body tuck. If you haven’t, body tuck is when one of your buddies hits the rear of your car causing the body to get sucked into the wheel. Body tuck makes your car extremely hard to drive and can definitely ruin a good run out on the track.
PROTOform has some new Anti-Tuck Body Stiffeners to eliminate the problem. These are molded out of crystal clear Lexan and mount with three screws. The stiffeners also help to reduce unwanted body fluttering at speed. The part number for the stiffeners is #1721-00, they have a street price of $10, and you can get more information at This Link over on PROTOform’s website.
May we be the first to wish you a great Friday! Get it kicked off right with a BSRC Mystery Link.
Figuring out where to drill the mounting holes on your freshly painted touring car body can be a real hassle so PROTOform has a new kit that should make it a whole lot easier. PROTOform’s new Crosshair Body Mounting Kit uses magnets to help you perfectly align and mark the holes before you drill.
* Uses high powered magnets for pinpoint accuracy
* Red anodized aluminum w/ storage box
* Perfect for mounting painted rc bodies
* Fits on most on-road car’s body posts
The Crosshair mounting kit has a part number of #6032-00 and is priced at $25. To get more information over on the official PROTOform website simply click This Link.
We have lots more PROTOform news Right Here on BigSquidRC.
PROTOform Crosshair Gallery
PROTOform’s latest body is a lightweight version of their G6-T oval body. It is molded from lightweight .025″ genuine Lexan and is designed to give ultra-high downforce. In the picture above the G6-T sports a slick “Breaking Bad” paint job, but comes in clear so you can put your personal paint scheme on it.
* Comes with spoiler mounting hardware
* Includes over-spray film, window masks and decal sheet
* Fits most popular 200mm sedans
The part number is #1236-25, it has a street price of $29, and you can get more information at This Link.
Thank goodness it’s Friday, Click Here for a TGIF Mystery Link.
When it comes to making world class racing bodies for touring cars, PROTOform is the king of the hill. Their latest body, the Mazda6 GX, is sure to win as many races as it will turn heads with its cool look.
The PROTOform Mazda6 GX is a 190mm clear Lexan body designed to fit on touring cars. It comes with details like hood air extractors, striking lines, and a signature Mazda grill. The body is fully licensed and comes with overspray protection, window masks, and a rear wing.
There are two part numbers, #1536-25 for the light weight version, #1536-30 for the regular, and you can expect a street price of right around $25. Hit up This Link for more information over on the official PROTOform website.
Want more PROTOform news? Simply Click Here.
The crew over at PROTOform have announced their latest oval body, the Cyclone 10.0. The Cyclone is a full 10″ wide resulting in a body good for rubber tire, loose dirt track, 4wd, and Nitro Late Model driving. For aerodynamic performance, the Cyclone features offset front fenders and skewed quarter panels on the rooftop vortex generators. The Cyclone is all about downforce, side bite, and going fast.
The part number for the Cyclone 10.0 is #1235-21, the street price is $37, and you can get more information at This Link.
Click Here for more Protoform news on BigSquidRC.
PROTOform Cyclone Gallery
PROTOform has just announced their latest body, a 1971 Pontiac Trans Am. Once again the PROTOform crew has knocked one out of the park, the Trans Am looks awesome and it should perform quite well on your VTA racer or cul-de-sac speed machine.
With scale realism all the rage, PROTOform put lots of scale detailing into the Trans Am, examples of this are the shaker hood scoop, duck tail rear spoiler, and aggressive front beak. The Trans Am also comes with a spare nose cone just in case you crash as often as we do.
* Officially licensed by General Motors
* Lots of details for added scale realism
* Formed from genuine GE .030 lexan
* Fits VTA rules touring cars
* Comes with extra nose cone & hardware
* Extensive decal sheet is supplied
* Comes with over spray film and window masks
* Length: 17.87”
* Height: 4.17”
* Wheelbase: 10.24”
* Width at front wheel wells: 7.8”
* Width at rear wheel wells: 8.15”
The part number for the PROTOform ’71 Trans Am is #1535-30, it has a street price of $33, and it has a release date of September 19th.
Click Here for more PROTOform news right here on BigSquidRC.
PROTOform Trans Am Gallery
Whether you are working on a perfect scale machine or simply trying to get your weekend bash body to look right, getting a nice straight line with curved lexan scissors can be a pain. PROTOform has a new Better Edge Sanding Block that can help make your life easier. Its straight edge makes it easy to get a nice straight line on the bottom of your body, while its curved edges make life easier in the nooks and crannies. It can also come in handy when sanding on parts or tires.
The PROTOfrom sanding block is made from nylon and uses a hook-and-loop system to hold its 120 grit sandpaper. It has a part number of #6108-00 and a street price of $8. Hit up THIS LINK for more information.
For more PROTOform news simply click THIS LINK right here on BigSquidRC.
PROTOform Sanding Drum Gallery
The crew over at PROTOform have been very busy, here are their three latest products.
First up is their new Chevy Camaro ZL1 clear lexan body. The Camaro body is 190mm wide and made to bolt right up on your touring car. Great scale looks with PROTOform style give this body an edge over the competition. The part number is #1532-30 and it has a street price of $28. Hit THIS LINK for more details.
There are a whole lot of guys that race dirt oval here in America and PROTOform has a brand new body for them, the Cyclone 9.5 Late Model clear race body. This is PROTOform’s first ever dirt oval late model race body and utilizes all sorts of aerodynamic tricks to help keep your car glued to the track. The part number is #1234-21 and it has a street price of $38. Hit THIS LINK for more details.
Want to put the perfect finish on your body? PROTOform has just announced a new Better Edge sanding drum. Simply bolt the sanding drum to your rotary tool and say hello to perfect wheel wells! The part number for the sanding drum is #6103-00 and has a street price of $28. Hit THIS LINK for more details.
Want to catch up on more PROTOform news? Check out THIS LINK right here on BigSquidRC.
PROTOform New Release Gallery
The World GT class has been gaining momentum due to many factors, and now the guys over at PROTOform have introduced a new body for the class, the Gianna GT. Like all PROTOform products, their latest body is of the highest quality and is made for performance. The Gianna GT features a large front splitter and a low drag rear wing, features that help keep your 200mm World GT car glued to the track.
The part number for the Gianna GT is #1534-00 and it has a street price of $25. Hit up the Official PROTOform Website for more information.
Want to read more PROTOform news? Hit up THIS LINK on BigSquidRC.
PROTOform Gianna GT Body Gallery
Having a proper body on your oval car makes a world of difference. PROTOform has just announced a re-release of their popular T-HD oval body. The new T-HD is pulled from lightweight .025″ genuine Lexan to help make your car faster than ever. The new lightweight T-HD helps to lower your cars center of gravity, therefore giving you faster corner speed, which is key when driving oval.
Street price for the T-HD is around $30, the part number is #1226-25, and you can get more information on the official PROTOform Website. Also, to read more PROTOform news on BigSquidRC, THIS is the link you want.
PROTOform T-HD Gallery