Beef up your 2wd ECX with some new Front Spindles from RPM. The RPM spindles are molded from RPM’s uber plastic blend and were designed to be long lasting and trouble free. The RPM spindles also utilize larger bearings, a necessity for hardcore bashing.
The RPM spindles have a part number of #73292, they are priced at $11, and they should start hitting hobby shops later in the month. Get full details at This Link over on RPM’s website.
Read up on more RPM News on BigSquidRC.
Nothing looks tougher sticking out of a hood than a big intake and blower. Now RPM makes it easy to put one on your car or truck with their mock intake and blower set. The RPM unit is made for scale realism featuring blower belt ridges, pulley splines and recessed butterflies in the scoop. It is easy to install requiring the use of just 3 screws, and with a large flat plate underneath, it won’t get torn off when you crash.
The part number for black is #73412 and they are street priced at $9. Chrome has a part number of #73413 and their street price is $11. Both start hitting hobby shops in late July and you can get full details at This Link over on the official RPM website.
Click Here for more RPM news on BigSquidRC.
RPM did not simply re-release an old part with their Gear Cover for the Associated RC10 Classic, they redesigned it from the ground up.
The new gear cover for the RC10 is made from molded plastic, which is more durable than the stock part, and also creates a better seal to help keep dirt from getting into the spur/pinion gear area. RPM also redesigned the gear cover to leave more room for bigger pinions and for a larger VTS slipper clutch. As a final touch, it is only available in retro dyeable white.
The part number is #70081, it has a street price of $8, and they start hitting hobby shops in early July. Get full details at This Link over on RPM’s website.
Read up on your RPM news at This Link on BigSquidRC.
Tired of breaking the nerf bars on your 1/10 Traxxas Rally, 2wd Slash LCG, or Slash 4×4? Well RPM has the solution for you, their new nerf bars feature extra webbing and are molded from RPM’s famous engineering grade nylon to take a beating without breaking. The nerf bars are available in two different colors and come with RPM’s limited lifetime warranty against breakage.
The part number for black is #70652, for blue it is #70655, and both are priced at $8. These start shipping in about two weeks and you can find more details at This Link over on the RPM website.
Thank Goodness It’s Friday! Kick off your weekend with a TGIF Mystery Link!
RPM has new rear a-arms for the ECX Ruckus/Circuit/Torment. Not only are the RPM arms much stronger than the stock units, but they are also higher performance. The RPM arms are built to tighter tolerances and are 21% lighter than the stock arms. Stronger, plus higher performance, plus lifetime warranty, equals winning!
The part number for the rear arms is #70462, they are priced at $11, and they should hit the market at the end of the month. Click Here to get complete details over on the official RPM website.
Want more RPM news? Find more at This Link on BigSquidRC.
It would be difficult to find a more iconic name for basher parts than RPM RC Products. For years the RPM crew has been making ultra tough plastic parts to give bashers more time driving, and less time wrenching. When you look around the BSRC offices nearly every one of our “personal vehicles” has RPM parts all over it.
RPM is based out of Southern California, so while in the area we were lucky enough to get to spend some time with them.
RPM is extremely proud that all their parts are made right here in the USA. They are set-up to design, make the molds, and actually produce their famous plastic parts entirely under one roof. Also of note, while most of their parts go out the door under the RPM logo, they also do OEM work for some “famous” rc names. If you are an rc company needing some plastic parts made, it might be worth your time to give RPM a ring.
Along with Brian, we were most struck by the pure passion shown around the RPM offices. They eat, sleep, and breathe, making the highest quality parts possible, and that a lot of heart and soul goes into every single product they make. The RPM crew is hardcore about getting the design perfect, the molds perfect, and ultimately, the best plastic upgrade parts you can put on your bash machine.
We would like to say “Thank You!” to Richard, Atticus and the entire crew at RPM, we learned so much about the fine art of making plastic parts, and about the rc industry as a whole. The folks over at RPM are good people, give them your support whenever you can.
BSRC Road Trip - RPM
For all you ECX owners, the good folks over at RPM RC have announced Front A-Arms for the Torment, Ruckus, and Circuit. In typical RPM fashion, the new arms were designed for extreme use, built much beefier than that stock units, yet with tighter tolerances to reduce slop. Larger bosses are used in the hinge pins areas to reduce breakage, while angled leading edges help the arms slide over objects. RPM also removed the tiny outer hinge pin screws, replacing them with an in-line screw to help improve overall strength. They also come with RPM’s limited lifetime warranty against breakage for piece of mind.
The part number for the arms is #70582, they have a street price of $12 per pair, and they should start hitting hobby shops later this month. For complete information hit up This Link to head over to the RPM website.
Click Right Here for more RPM news on BigSquidRC.
“When you speak, RPM listens.”, that’s a direct quote from RPM’s website. RPM had a bunch of requests for Extended Rear Arms for the Traxxas Summit/Revo/E-Revo so they made them for you, the hardcore bashers of the world. The new a-arms are molded out of RPM’s legendary plastic and were designed to keep on ticking even during extreme use.
#70432 Extended Left Rear A-arms – Black
#70435 Extended Left Rear A-arms – Blue
#70482 Extended Right Rear A-arms – Black
#70485 Extended Right Rear A-arms – Blue
The arms have a street price of $14 per set and they should hit hobby shops in early April. To get more information just give This Link a Click to head over to the RPM website.
You can never get enough RPM news, find more at This Link on BigSquidRC.
RPM RC has announced longer hinge pins for the Associated RC10 Classic. The stock RC10 Classic rear hinge pins are too short for RPM A-arms so the new RPM pins are longer to ensure a proper fit.
The part number is 70590, the retail price is $7 per pair, and they should start hitting dealers mid-March. Click Here for more information over on the RPM website.
Hit up This Link for more RPM news right here on BigSquidRC.
RPM RC has come up with mock exhaust tips to give your rc vehicle even more scale realism. Modeled after a full sized 3″ exhaust cut at a 45° angle, the RPM tips are easy to mount and weigh less than 2 grams.
The tips come in pairs, one for each side of your vehicle, and come in two different colors, black (#70292) and chrome (#70293). Street pricing is $8 for black, $10 for chrome, and both will start hitting local hobby shops in mid March. For more information hit up This Link over on RPM’s website.
Happy Friday everyone! Get your weekend off to a good start with a BSRC Mystery Link.
RPM Mock Exhaust Gallery
RPM RC has announced a new, larger sized, bearing blaster. The new unit is called the Mega Bearing Blaster and can handle bearings up to 1.25″ in diameter. That means it can handle the bearings from your 1/5th scale, or even your rollerblade or skateboard.
The Mega Bearing Blaster is easy to use and has a part number of #70420. Street price is $9 and it should start hitting hobby shops later this month. For more information click This Link that will take you over to the official RPM website.
Click Here for more RPM news on BigSquidRC.
Ever broken off the mounting tabs on your Traxxas VXL-3S speed controller? Yes, we have too. Thankfully the folks over at RPM RC are good at solving such problems. RPM has created a new ESC Cage to make sure you esc stays firmly in place, even if you have an older one with the tabs broken off already. Made from engineering grade nylons right here in the USA, the RPM ESC cage can withstand even the toughest of bashing sessions.
The cage comes in two different colors, blue, part number #70605, and black, part number #70602. Street price is $9 and they have a release date of February 13th. Click Here for more information over on the RPM website.
Click Here to get your first TGIF Mystery Link of the day.
RPM ESC Cage Gallery
RPM RC has added a new color option to their lineup of Traxxas rod ends, green. The green rod ends will go great with your Grave Digger, Monster Energy, or Kawasaki themed truck. Or, you might be like Brian and simply like the color green.
The part number for the short green rod ends is #80474, while the part number for the longs is #80514. Both come in sets of 12 and have street prices of $9 and $10. For more information simply click This Link to head over to the official RPM website.
Click Here for more RPM news on BigSquidRC.