For Bashers, By Bashers!

You are browsing the "Traxxas" category archive.

RPM ESC Cage Traxxas VXL-3S

RPM ESC Cage for Traxxas VXL-3S

Ever broken off the mounting tabs on your Traxxas VXL-3S speed controller? Yes, we have too. Thankfully the folks over at RPM RC are good at solving such problems. RPM has created a new ESC Cage to make sure you esc stays firmly in place, even if you have an older one with the tabs broken off already. Made from [...]

Read More...

Pro-Line Apocalypse Body

Pro-Line Apocalypse Clear Body for Traxxas Summit

You never know when the next Zombie attack will happen, prepare now with a Pro-Line Apocalypse clear body. Formed from genuine GE Lexan right here in the USA, the Apocalypse Armored Military Styling was designed to stand up to the toughest Zombie hoards and to the rigors of your local bash spot. The Apocalypse is made to fit the Traxxas Summit, [...]

Read More...

RPM Green Tie Rod Ends Traxxas

RPM Green Traxxas Tie Rod Ends

RPM RC has added a new color option to their lineup of Traxxas rod ends, green. The green rod ends will go great with your Grave Digger, Monster Energy, or Kawasaki themed truck. Or, you might be like Brian and simply like the color green. The part number for the short green rod ends is #80474, while the part [...]

Read More...

Pro-Line Apocalypse Traxxas Summit

Sneak Peek – Pro-Line Apocalypse Body for Traxxas Summit

Today we got a sneak peek at the latest creation from Pro-Line, their new Apocalypse clear Lexan body for the Traxxas Summit. As you can see in the picture, it is one tough looking body that will make quite a statement at your local bash spot. The part number for the Pro-Line Apocalypse is #3422-00, it should have a street [...]

Read More...

T-bone Racing Traxxas Rear Skid Plate

T-Bone Racing Rear Skid Plate for Traxxas Rustler

The crew over at T-Bone Racing have come up with a good way to protect that expensive motor on your Traxxas Rustler. Their rear skid plate is made from nylon and is large enough to provide some real protection while you are out bashing. The skid plate is easy to install and comes with T-Bone’s lifetime warranty. The part number is [...]

Read More...

Robby Gordon Dakar 2014 HST

Robby Gordon’s 2014 Dakar Rally HST

With the kick off of the 2014 Dakar Rally just 2 days away, there are a lot of wrenches spinning down in South America getting ready for one of the toughest races on Earth. One of the coolest trucks entered this year is from Robby Gordon. His bright orange Speed Energy, Toyo Tires, Traxxas backed truck looks trick and ready [...]

Read More...

2014 Traxxas XO-1 Super Car

2014 Traxxas XO-1 1/7th RTR Super Car

Traxxas has updated their XO-1 speed run car for 2014. What might some of the updates be? * BNG (bold new graphics) * It no longer comes with batteries to save you some cash The rest of the car looks to be identical to the previous version with Castle ESC and brushless motor, TQi controller, etc. The part number for the 2014 XO-1 is [...]

Read More...

ST Racing Concepts – Slash to E-Buggy Conversion

We teased this a while back, but now it’s official. Check out the ST Racing Concepts Slash 4×4 1/8th E-Buggy Conversion kit. Some people call a conversion like this the backslash, but STRC is going with E-Buggy. It’s been a year since their 4×4 LCG Conversion kit, and this conversion is looking just as cool! Advantages of this conversion are [...]

Read More...

TheToyz Protector Shroud

TheToyz.com Protector Shroud for Traxxas Slash 4×4 and Rally

When you bash hard you get all sorts of ugly inside your truck. One way of keeping your expensive electronics clean and happy is with a protector shroud. The crew over at TheToyz have a new fabric protector shroud to keep the inside of your truck debris free. It attaches with Velcro on the sides, while a zipper is used [...]

Read More...

Mip Race Duty CVD Traxxas

MIP Steel Race Duty CVDs for Traxxas

If you are looking to shave some weight and rotating mass MIP has announced Race Duty CVDs for a bunch of Traxxxas vehicles. The lighter weight of the Race Duty CVDs can help your truck accelerate faster. The Race Duty series CVDs are recommended for no higher than 2S use and are not recommended for bashing. * #13265 for Traxxas electric [...]

Read More...

RPM Traxxas Summit A-arms

RPM A-Arms for Traxxas Summit

All you Traxxas Summit owners can now rejoice, RPM now has Front A-Arms for your beast. Previously only the right arm from the RPM Revo set would fit properly, now RPM has made a new left arm to really help beef up your Summit. The left front Summit arms become available early next month and are priced at $15. The part [...]

Read More...

Pro-Line Sling Shot 2.2 Mounted 10101-10

Pro-Line Sling Shot 2.2″ Paddle Tires Mounted

Pre-mounted tires are great for saving time and the aggravation of the whole gluing process. Now you can get Pro-Line Sling Shot 2.2″ paddle tires pre-mounted on black Desperado Wheels. The Sling Shots have 12 paddles and are ready to roost some serious sand on your Traxxas 1/16th Revo. The part number for the Sling Shot pre-mounts is #10101-10 and have [...]

Read More...

Pro-Line Gladiator 2.8" Tires

Pro-Line Gladiator 2.8″ Traxxas Style Bead Truck Tires

If you are a basher then chances are you already know how well Pro-Line Gladiators work on loamy dirt. The multi-level step pin design of the Gladiators gives them great traction on the infield of your local baseball park or empty dirt lot. Pro-Line has now made the Gladiators available in a 2.8″ bead making them a perfect fit for [...]

Read More...

Traxxas Stampede 4X4 XL-5 Brushed

Traxxas Stampede 4X4 XL-5 Brushed RTR

Want to get a new Traxxas Stampede 4X4 but don’t want to put too much of a dent in your wallet? Already have a brushless system and don’t want to pay extra for a RTR that comes with one installed? If so, Traxxas has announced a Brushed XL-5 version of the Stampede 4×4. The brushed version comes with a Titan [...]

Read More...

Pro-Line 1966 Ford F-100 Clear Body

Pro-Line 1966 Ford F-100 Hay Hauler Clear Body

The good folks over at Pro-Line have released full information on their two new fully licensed 1966 Ford F-100 “Hay Hauler” bodies. These have that trick old school look and are very detailed to give your truck a unique look the next time you hit the local bash spot. Check out the step-sides and fender flares, the ’66 F-100 will [...]

Read More...

Reviews