For Bashers, By Bashers!

You are browsing the "Castle Creations" tag archive.

Castle Mamba X ESC

Castle Creations Mamba X ESC

New from the good folks over at Castle Creations is the Mamba X ESC. The Mamba X can be used in an extremely wide variety of applications. From 2S to 6S, from 1/10th scale to 1/8th scale, the Mamba X is ready to over power your car or truck. * Waterproof * 8 amp adjustable BEC, 5.25 to 8.0 volts * Aluminum case * [...]


Castle Creations BEC 2.0 Waterproof

Two New BECs From Castle Creations

New from Castle Creations is a pair of BECs. The first is the BEC 2.0 which is aimed at the air crowd with the second being the BEC 2.0 Waterproof Edition for surface drivers. The air BEC is lightweight at just 0.7oz and is designed for 14 amps. The waterproof surface version is designed for 15 amps and comes in a [...]


Castle Creations Sensored Brushless Motors

Castle Creations Sensored Brushless Motors

Do you like the insane power of a non-sensored motor, but want the precision start up produced by a sensored design? Now you can have both with the new Sensored Brushless Motors from Castle Creations. The new Castle sensored motors come in a wide variety of sizes and kV ratings to bring crazy power and precision to 1/10th and 1/8th [...]


BigSquidRC Dirt Jumping Championships

Event Coverage – BigSquidRC Dirt Jumping Championships

Last Sunday the BigSquidRC Bash Crew along with the St. Louis RC Freaks Club put on the 2016 BigSquidRC Dirt Jumping Championships presented by Castle Creations and Pro-Line Racing. We have held multiple jump contests in the past, but this time we wanted to change things up and hold one strictly on dirt in the same type of conditions that [...]


BigSquidRC Long Jump Contest

Castle Creations & Pro-Line Sponsor This Weekend's Dirt Jump…

We want to give all of you a cordial invite and a final reminder that the BigSquidRC Dirt Jumping Championships are ready to go off this Sunday in Fenton Missouri. The Dirt Jumping Championships are presented in partnership with the St Louis RC Freaks Club and are sponsored by Castle Creations and Pro-Line Racing. Where as some of our previous [...]


Castle Savings Event

Castle September Savings Event

Now through September 30th, Castle Creations is holding a September Savings Event. This special event allows you to save cash on some of Castle’s most popular products. Rebates are available on a wide variety of Castle surface, air, and multi-rotor products, to get all the scoop simply Click This Link to head on over to Castle’s official website. Want more Castle [...]


Castle DMR 30/40 ESC

Castle DMR 30/40 Quadcopter ESC

Looking for a good ESC for your quadcopter? New from Castle Creations is the DMR 30/40. DMR stands for dedicated multi-rotor and the new 30/40 should work in a wide variety of quadcopter applications. Here are some of its specs & features- * Can be used on up to 6S LiPo * Made for set-ups pulling up to 40 amps * Adaptive timing [...]


2016 HobbyTown USA National Convention

2016 HobbyTown USA Convention Wrap Up

You know what they say, “A picture is worth a thousand words.”. If that saying is true, this 2016 HobbyTown Convention wrap up should be good for nearly 40,000. Check out the pictures below to take in the various sights from the convention. You’ll find pictures of the Kyosho, Tamiya, Venom, Castle, A Main, and Imex booths. You’ll also see pictures [...]


RPM ESC Cage Castle Monster

RPM ESC Cage for Castle Mamba Monster 2/X & Traxxas MXL-6S

If you are an extreme basher then you already know that normal double sided tape or Velcro simply will not keep an ESC in place when the going gets rough. The best way of keeping an ESC in its place during extreme use is by bolting it to your chassis. To help all you hardcore bashers keep your Castle Mamba [...]


Blade Manta FPV Racer

Blade Manta FPV Race Wing

Looking to go a bit more extreme with your FPV racing? If so, look no farther than the new Manta FPV Racer from Blade. This flying wing comes set-up for not only FPV viewing, but also for some serious speed. How fast does it go? You can expect speeds in excess of 90 mph with the included Blade 1800kv brushless [...]


X-Maxx Tire Destruction Video

Video – Total Tire Destruction On A Traxxas X-Maxx

What do you get when you bolt in a Castle 2028 on 8S LiPo into a Traxxas X-Maxx with the aid of a Kershaw motor mount? You get total tire destruction, that is what. Starting at the 35 second mark of the video above, see exactly what it takes for YouTuber Evolution RC to totally shred the stock tires on [...]


Castle Mamba XL X Brushless Review

Castle Mamba XL X Brushless System Review

With 2016 being dubbed “The Year of Large Scale”, there are a large number of consumers looking for 1/5th scale power systems. Whether it be for an electric converted HPI Baja 5B, or the new Traxxas X-Maxx, big power systems are in demand. A few months ago Castle Creations announced their new Mamba XL X brushless power system. The new [...]


Kershaw Designs X-Maxx Motor Mount

Kershaw Designs Traxxas X-Maxx Motor Mount

Wanting to install some serious power in your Traxxas X-Maxx? If so, Kershaw Designs makes it easy with their new Motor Mount. The motor mount is machined from high quality aluminum and works with 56 and 58mm 1/5th scale motors, as well as the legendary Castle Creations 2028. The aluminum motor mount is much stronger than the stock unit, plus [...]


Castle Telemetry Link

Castle Creations Telemetry Link for Futaba and Spektrum Radi…

Wouldn’t it be cool if you would read the telemetry from your Castle Creations ESC on the screen of your Futaba or Spektrum transmitter? Sure it would! Castle has just announced their Telemetry Link that allows you to do just that. The Castle Telemetry Link works on select surface and air transmitters, and on select Castle ESCs. Once installed, the Telemetry [...]


castle creations sidewinder micro 2 esc

Shipping Now – Castle Sidewinder Micro 2

The good folks over at Castle Creations wanted us to let you know that the new Sidewinder Micro 2 is now shipping. The Micro 2 was designed to take full advantage of advancements in component quality and in software design. Both the ESC, and the Sidewinder 2 with brushless motor combos, are now available to power up your 1/18th scale [...]