For Bashers, By Bashers!

You are browsing the "chevy" tag archive.

RC4WD Chevy Blazer Bumper

New Chevy Blazer Bumpers From RC4WD

With a lot of scalers running the RC4WD Chevy Blazer hard body, three new bumpers have been announced to allow owners to personalize their rigs. First up is a fully licensed Tough Armor Rear Bumper. The Tough Armor unit is CNC machined from aluminum and anodized in black. It also has mounting points for tow shackles for even more scale detailing. [...]

Read More...

PROTOform 1971 Chevrolet Camaro Z28

PROTOform 1971 Chevrolet Camaro Z28 Body

Do you plan on racing the Vintage Trans-Am class at your local track this winter? If so, have a look at the new 1971 Chevrolet Camaro Z28 Clear Body from PROTOform. The vintage Camaro is a one piece design, making it fast and easy to hit the track. * Exceptional scale detailing * Formed from genuine GE Lexan * Officially licensed by General [...]

Read More...

Vaterra K10 Ascender Review

Vaterra 1972 Chevrolet K10 Ascender Pickup from Horizon Hobb…

Scale rock crawlers just might be the hottest product segment on the market right now. There are a number of reasons for that- they look good, they run forever, and they are loads of fun. A couple of years ago Vaterra introduced the Ascender, a scale crawling platform that was designed from the ground up to outperform everything else on [...]

Read More...

Kyosho Chevrolet 1970 Chevelle SS

Teaser – Kyosho 1970 Chevrolet Chevelle SS

Here ya go folks, pictures of the upcoming 1970 Chevrolet Chevelle SS from Kyosho. Our friends over at Hobby Media were busy covering the Tokyo Hobby Show over the weekend where they were able to snap a few shots of this highly anticipated model. The Chevelle SS will be part of Kyosho’s Fazer VEi series, which means it will come [...]

Read More...

Pro-Line Early 50s Chevy Panel Truck Clear Body

Pro-Line Early 50s Chevy Panel Truck Clear Body

Have you been wanting to paint up a custom Grave Digger body? If so, the Early 50s Chevy Panel Truck Body from Pro-Line should be a perfect start. This body was originally released back in 2001 during the T-Maxx craze, now it is back for all you scale monster truck fanatics. * Length- 17.6″ * Width- 7.3″ * Height- 5.3″ * Wheel Base- 11.5″ Pricing [...]

Read More...

PROTOform Chevrolet Corvette C7.R Clear Body

PROTOform Chevrolet Corvette C7.R Clear Body

Hot and new from the good folks over at PROTOform is a Chevrolet Corvette C7.R Clear Body. This version of the Vette was designed to fit 360mm long wheelbase 1/8 scale on-road cars like the Kyosho Inferno GT2. Of course the PROTOform Corvette has loads of detailing to help your car look just like the full scale version and comes [...]

Read More...

RC4WD Chevrolet Blazer Hard Body Complete Set

RC4WD Chevrolet Blazer Hard Body Complete Set

New from RC4WD is the Chevrolet Blazer Hard Body Complete Set. As the name states, it comes with a Blazer hard body, plus one of their highly detailed interiors. The injection molded plastic body comes in grey, the interior comes in black, and it does come with some chrome parts. For even more scale realism, the hood opens via metal [...]

Read More...

Vaterra 1972 Chevy C10 Pickup Truck

Vaterra 1972 Chevy C10 Pickup Truck

Whoa, now here is one hot looking truck, the new Vaterra 1972 Chevy C10. The Vaterra crew has once again knocked it out of the park with this dropped ’72 C10. Painted in black, the C10 will bring some serious attitude to your next bash. And thanks to its 4wd V100-S chassis, you can bash it extremely hard with very [...]

Read More...

Pro-Line Chevy Silverado Pro-Touring Clear Body

Pro-Line Chevy Silverado Pro-Touring Clear Body

Get your short course truck ready for some serious on-road bashing with the new Chevy Silverado Pro-Touring Body from Pro-Line. The Pro-Touring fits a wide variety of short course trucks like the Pro-Line PRO-2 SC, the Traxxs Slash, Slash 4X4, & 1/10 Rally, the Associated SC10, the Kyosho Ultima, the HPI Blitz, and the Losi XXX-SCT & Ten-SCTE. The hot [...]

Read More...

PROTOform Camaro Z/28 Body

Video – PROTOform Chevy Camaro Z/28 Clear Body

The good folks over at PROTOform have announced a new Chevy Camaro Z/28 clear body for USGT and Scale Spec racing. With a lower stance and an enhanced front end, the Z/28 was designed to work well on both carpet and asphalt tracks, not to mention it would look pretty sharp burning rubber around your cul-de-sac. To go along with [...]

Read More...

Pro-Line Chevy Silverado Axial SCX10

Pro-Line Chevy Silverado Clear Body for SCX10 Trail Honcho

Pro-Line now has the iconic styling of the Chevy Silverado for your Axial SCX10 Trail Honcho. Fully licensed by Chevy and made right here in the USA, the new Silverado body can give your Axial a tough new look out on the trail. Street pricing is $43, it has a part number of #3439-00, and they are set for release in [...]

Read More...

Chevy Silverado Clear Body PRO-MT

Pro-Line Chevy Silverado Clear Body for the PRO-MT

The Pro-Line PRO-MT has taken the bashing world by storm, now you can give yours a tough new look with a Chevy Silverado body from Pro-Line. Like the stock body, the Chevy is made from extra thick Lexan, thus allowing it to endure those long bashing session. The Chevy is also fully licensed and sports a great scale look that [...]

Read More...

Vaterra 1986 Chevrolet Blazer Ascender RTR

Now RTR – Vaterra 1986 Chevrolet K-5 Blazer Ascender

The kit version of the Vaterra K-5 Blazer has taken the scaling/trailing world by storm. It has incredible scale detailing and good manners on the trail. Now Horizon Hobby has announced that it will be available as a RTR. The RTR features a 2.4GHz Spektrum transmitter, a 35 turn brushed Dynamite motor, and waterproof electronics. The Blazer RTR has a street [...]

Read More...

Pro-Line 2014 Chevy Silverado Clear Monster Truck Body

Pro-Line 2014 Chevy Silverado Clear Monster Truck Body

Pro-Line brings the scale realism with their new 2014 Chevy Silverado Clear Monster Truck Body. As you can see by the squared off fenders and new grill decal, the Pro-Line Silverado looks very much like its full scale counterpart. Molded from crystal clear Lexan, the Silverado was designed to fit monster trucks like the Traxxas Summit, Revo, T-Maxx, and Associated [...]

Read More...

proline_chevy_silverado_2014

Sneak Peak – Pro-Line 2014 Chevy Silverado Body

For a while now, people have been wanting some newer Chevy truck bodies, and it looks like Pro-Line is about to deliver what they want. We got a sneak peak, at their new 2014 Chevy Silverado Body for the Traxxas Revo 3.3, T-Maxx 3.3, MGT, and other similar monster truck size vehicles. The part number is 3430-00, it will [...]

Read More...