For Bashers, By Bashers!

You are browsing the "driveshafts" tag archive.

SSD Wraith Upgrades

New SSD Upgrades For the Wraith

As we get ready to enter peak season for off-road driving, it is time to beef up that Wraith/RR10 of yours with some aluminum upgrades. Just announced by SSD RC are three new aluminum goodies to make your Wraith all that it can be out on the trail. First up are Pro Aluminum C-Hubs. These are CNC machined from high quality [...]

Read More...

SSD STEEL DRIVESHAFT AXIAL SCX10 RR10

SSD Scale Steel Driveshaft For SCX10/RR10

Breaking a spindly plastic driveshaft is nothing new if you are a hardcore trail driver. To beef up the driveline of your SCX10 or RR10, SSD RC has just announced a Scale Steel Driveshaft. The unit not only has the scale appearance that everyone is after now days, but is also made from CNC machined hardened steel. The hardened steel [...]

Read More...

MIP Axial Spline Drive Kits

MIP CVD Spline Drive Kits For Axial Trucks

MIP has just announced 6 new C1 X-Duty CVD Spline Drive Kits for various Axial trucks. These are are truly heavy duty and are made from the highest quality steel. The driveshafts have also been heat tempered for added durability. Once installed, you’ll no longer have to worry about popping a driveshaft while out on the trail, even when powered [...]

Read More...

Boom Racing Voodoo CVD Center Drive Shafts

Boom Racing Voodoo CVD Center Drive Shafts

New from Boom Racing are very trick Voodoo CVD Center Drive Shafts. These beefy metal drive shafts are available in various lengths from 45mm to 145mm, thus helping them fit a huge variety of different 1/10th and 1/14th scaled trucks. As you can see, they have a great scale look that can add some serious flair to your next build. The [...]

Read More...

SSD Steel Driveshaft Axial Yeti

New Scale Steel Driveshafts from SSD

Beef up your Axial Wraith or Yeti with new Scale Steel Driveshafts from SSD RC. The new driveshafts are CNC machined from hardened steel to not break or twist, even under the hardest of trail conditions. They were designed to keep a scale look to them, while precision cut splines keep their action smooth. A 50 degree operating angle is [...]

Read More...

MIP C-Drive Axial Yeti

MIP X-Duty Rear C-Drive Kit for the Axial Yeti

The Axial Yeti is tough but its plastic rear driveshaft can be prone to breakage under heavy use. If you have been twisting/breaking the stocker, MIP have announced a new X-Dutry C-Drive Kit. For the ultimate in durability, the MIP unit is made from heat treated steel and uses their spline drive technology. The part number is #14390 and it has [...]

Read More...

MIP C-Drive Vaterra K5 Blazer

MIP X-Duty C-Drive Kit for the Vaterra K-5 Blazer

Trail driving is a lot of fun, right up to the point when you get in a tight spot, then tag the gas and pop a driveshaft. To help eliminate that lowly walk of shame back to your truck for a replacement shaft, MIP has some new heavy duty driveshafts for the Vaterra K5 Blazer. The X-Duty C-Drive Kit from MIP [...]

Read More...

MIP Shiny Pucks Associated B5

MIP Pucks Shiny Drive System for Associated B5/B5M

The MIP Puck system is pretty slick. They use a puck system where the drive-shafts slide into the out-drives to not only keep wear to a minimum, but to also give your buggy faster acceleration. MIP recently announced their Shiny Puck system for the Associated B5/B5M. The shiny pucks were designed for the more demanding loads of modified racing and their [...]

Read More...

MIP Spline CVD Center Drive Axial SCX10

MIP Spline CVD Center Drive Kit for Axial SCX10 12.3" Wheelb…

MIP has a new CVD Center Drive Kit for Axial SCX10s with a 12.3″ wheelbase (which includes the Axial Jeep Rubicon). The new kit does away with the old double set screw design and instead opts for a pin set screw. The drive hubs have also been changed so they no longer make contact with the spur gear cover. * Dual [...]

Read More...

MIP CVd RC4WD

MIP X-Duty C-Drive Kit for RC4WD Gelande II

If you have an RC4WD Gelande II then you have probably already found out that the plastic stock driveshafts can’t take much abuse. Our friends over at MIP also know they are a problem so they have announced a new X-Duty C-Drive Kit for the truck. The MIP units are heavy duty and made from steel, making them much stronger [...]

Read More...

MIP CVC Pucks Associated B5 B5M

MIP Pucks Bi-Metal R-CVD Drive System for Associated B5/B5M

If you are a stock class racer looking to go fast with your new Associated B5/B5M, the crew over at MIP have some new Bi-Metal CVDs for your consideration. This CVD set is very light to reduce rotating mass, while they also come with MIP’s Puck system so your outdrives will last much longer. The MIP set is 40% lighter [...]

Read More...

MIP Pucks Shiny Drive System Serpent Spyder SRX-2

MIP Pucks Shiny Drive System for Serpent Spyder SRX-2

For all you Serpent buggy owners, MIP has announced their Puck CVD System for the SRX-2. The Puck Shiny System comes with steel CVDs to handle mod power, plus the replaceable pucks will keep your outdrives & CV bones from wearing out so quickly. Oh ya, they look sharp and help with quicker acceleration too. The part number is #14125, [...]

Read More...

Dromida Aluminum Drivetrain Kit

Dromida Aluminum Drivetrain Kit

Looking to beef up the drivetrain on your Dromida 18th scaler? Well you are in luck with Dromida’s Aluminum Drivetrain Kit. The kit comes with everything you need to bulletproof your drivetrain, and it does so in style with blue anodizing. The kit includes- * Spur gear with o-rings & springs * Center drive shaft * Four dog bones * Four axles The part [...]

Read More...

MIP CVD Halix

MIP X-Duty CVD Kit for the Vaterra Halix

All you Vaterra Halix owners can now rejoice, the crew over at MIP have designed some ultra-durable CVDs for your truck. The units that MIP designed for the Halix feature splined telescoping shafts that should handle a lot more power than stock without breakage. * Heat treated, all metal design * Grease and thread gel included * 100% made in the USA The part [...]

Read More...

RC4WDUltra Scale Hardened Steel Driveshaft set for Tamiya Bruiser

RC4WD Ultra Scale Hardened Steel Driveshaft set for Tamiya B…

RC4WD has a sweet new Hardened Steel Driveshaft Set for all you Tamiya Bruiser owners. The driveshafts are made from hardened steel to be extra tough and they were designed to look just like their full scale counterparts. * Weight- 2.75oz * Shaft end hole size- .2″ * Shaft outer diameter- .3″ * Short shaft travel distance- 3.15″-3.74″ * Long shaft travel distance- 5.11″-5.7″ The part [...]

Read More...