For Bashers, By Bashers!

You are browsing the "Hitec" tag archive.

Hitec D-Series Servos

Hitec D-Series 32-Bit Metal Case Servos

Just announced are three new D-Series 32-Bit Metal Case Servos from the good folks over at Hitec. The D-Series servos set a new standard for advanced programming and use a 32-bit microcontroller unit, along with a 12-bit analog to digital converter, to make them some of the most advanced servos on the market. * High resolution, rapid response design * Durable titanium [...]

Read More...

Hitec HSB-9381TH

Hitec HSB-9381TH Servo

Coming soon from the good folks over at Hitec is the HSB-9381TH servo. The 9381 is a high-end unit featuring an all aluminum case for durability and a brushless motor for improved efficiency. The high resolution 9381 is programmable and uses a hybrid (metal/plastic/duralumin) first gear to prevent inadvertent electrical contact. * 6 to 8.4 volt input * Ultra-low current consumption * Speed- [...]

Read More...

Hitec RDX1 Charger Review

Hitec RDX1 Battery Charger Review

While Hitec is best known for their servos, they have made some big strides in their battery charger game. The latest charger to hit the market from Hitec is the RDX1. The RDX1 is an extremely small charger that makes it easy to use just about anywhere. Does the RDX1 deliver a high quality charge? Does it have enough power? [...]

Read More...

Hitec Phantom X4 Charger

Hitec Phantom X4 Charger

Soon to be released from Hitec is the Phantom X4 Battery Charger. The Phantom X4 was specifically designed to charge four DJI Phantom 3 or DJI Phantom 4 Smart Batteries at once. This is big news for the drone crowd and the Phantom X4 can also charge two smart devices via USB ports and two remote controllers at the same [...]

Read More...

Hitec Power Peak D7 Review

Hitec Power Peak D7 Charger Review

Now days it seems like everybody brings 10 cars to go bashing. When you run 10 cars, you need to charge a lot of battery packs, and charge them quick. To meet this demand, Hitec released the Power Peak D7 Dual Charger. The Power Peak D7 is no joke with 20 amps of charging power available on both channels and [...]

Read More...

Hitec Energy Propel Combo Packs

Hitec Energy Propel Combo Packs

Hitec has announced that their popular Energy Propel Motors will soon be available in Combo Packs. These are powerful brushless motors that have a built in programmable ESC and are used to power drones/quadcopters. The Energy Propel combo packs will include two clockwise and two counter clockwise motors, making it easy to power up your favorite quad. The combo packs [...]

Read More...

Hitec X1 Nano

Hitec X1 Nano Charger

New from the good folks over at Hitec is the X1 Nano AC Input Balance Multicharger. The X1 Nano was designed to make charging a pack as easy as possible, without taking up a bunch of space. To charge a pack with the X1 Nano all you have to do is plug in a pack, select the cell chemistry, then [...]

Read More...

Hitec X4 Charger

Hitec X4 AC Pro Four Port Multicharger

New from Hitec is the X4 AC Pro. The X4 Pro can be used off of household AC power, or a DC power supply or car battery. It is also beefy, with up to 300 watts of charging power when DC powered. Here are some of its other features & specs- * Four output ports * Capable of charging NiMH/NiCd/LiPo/LiFe/Lilon/LiHV/Pb cells * Can [...]

Read More...

Hitec QuadRacer 280 FPV Unboxing

Looking for a RTR FPV Racer? This may be the one for you. We recently got our hands on the Hitec QuadRacer 280, and have been testing away for our review. Since you have a little bit before we are done, here are a few unboxing photo’s for you to check out. The Hitec QuadRacer 280 has a part number [...]

Read More...

Hitec RDX1 AC/DC Battery Charger

Hitec RDX1 AC/DC Battery Charger

While Hitec is primarily known for their high-end servos, they also have a great battery charger line-up. Their latest charger is the RDX1. The RDX1 is a tower style charger that has an extra small footprint, leaving you extra space on your pit table. It is an AC/DC design, making it easy to use anywhere, and it can charge all [...]

Read More...

Hitec RCD AEE MD10 Action Camera – REVIEW with videos!

These days, action cameras are essentially a dime a dozen. The category “action camera” used to only encompass a few specific models (GoPro, and… um… GoPro) but now that category has broadened to include a variety of new products from a variety of manufacturers. Some of the companies getting into the action camera segment are already recognizable by us RC [...]

Read More...

Hitec Pokemon Go Multi Jump Charger USB Output

Hitec Japan Pokemon GO Multi Jump Charger

Since we have lots of readers allover the world, this will be interesting for more than a few people. The crew over at Hitec Japan have released a photo of how versatile their Multi Jump Charger is. Not only can it be used to jumpstart cars, but it also makes a pretty handy portable cell phone charger for playing Pokémon [...]

Read More...

Hitec HobbyTown USA

Hitec Booth At The HobbyTown USA Convention

As you have probably noticed, Hitec has announced a bunch of new gear this year. Luckily, we got a chance to take a look at many of them in person at the 2016 HobbyTown USA Convention. Of course the Hitec crew had a plethora of high-end servos on hand, but they also had a pair of their new drones. The Racer [...]

Read More...

Hitec Power Peak D7 AC/DC Charging Station

Hitec Power Peak D7 AC/DC Charging Station

New from Hitec is the Power Peak D7 AC/DC Charging Station. The big news on the D7 is its power, it can charge at up to 20 amps on both of its output ports. The D7 also includes mini USB sockets which allow you to monitor battery health using Logview Software. A USB port is included for charging your cell [...]

Read More...

Hitec servo programmer tester

Hitec HFP-30 Digital Servo Programmer & Tester

Precisely dial-in your Hitec digital servos with Hitec’s new HFP-30 Servo Programmer & Tester. The HFP-30 has an easy to read LCD screen and the advanced features you are looking for to get the most out of your servos. Operating on 4.8 to 8.4 volts, the programmer/tester is priced at $79 and has a part number of #44427. Want to [...]

Read More...

Reviews