HPI Racing has just released a new video of their Ken Block WR8 FLUX in some wild action at their European warehouse. Watch the video to see not only some sweet drift action, but also what rc is all about, having some good old fashioned fun. Don’t forget to check out the HPI Website for more information on all their products.

While you are surfing the web today, why not check out a BigSquidRC TGIF Mystery Link?

TGIF, why don’t you give our Mystery Link a whirl?

These are not RC vehicles… yet. Ken Block and the Hoonigan Racing Team has changed things up for 2013! He’s got a new garage/building, and some new wraps on his rides. Long gone is the recognizable green and white, and now the dominant colors are blue, grey, and purple. Fingers crossed for HPI to come up with a alternate body for their Ken Block WR8 FluxRally Car.

Check out some other pictures here.

Speaking of HPI and Ken Block, have you seen our HPI Racing WR8 Flux – Ken Block Review?

The rc rally scene seemed to show up out of no where and explode with several companies all releases rally vehicles at the same time. The HPI Racing Ken Block WR8 FLUX was an attention grabber from the moment it was announced. The KB license was new to HPI and a surprise to many, so would the rally car live up to the hype? Keep reading to find out..

From: HPI Racing
Direct Link: Ken Block WR8 FLUX

Specs:

RTR or Kit: RTR
2wd or 4wd: 4wd
Shaft or Belt: Shaft
Electric or Gas: Electric
Waterproof: Yes
Scale: 1/8th
Length: 19 inches (485mm)
Width: 8.9 inches (227mm)
Height: 6.7 inches (172mm)
Wheelbase: 11.8 inches (300mm)
Motor: Vektor 4000kv Brushless
Speed Controller: Flux Vapor Pro
Radio: HPI TF-40 2.4GHz
Differential: Front, Center, Rear
Slipper Clutch: None
Shocks: 4 Oil shocks
Servo Saver: Yes
Screws: Hex
Bearings: yes
Tires: Licensed Replica Fifteen52 Tarmac Wheels
Battery: Not included
Part Number: 109314

Street Price: $480

Primary Competition: Traxxas 1/10 Rally, Thunder Tiger ER-4 Mini Countryman

What’s Needed To Complete: 4 AA batteries for the transmitter and a 2S or 3S Lipo for the car.

Test Drivers: Brian, Wrench, Adam the Intern, 3DBill

Test Venues: Leisure Hours Raceway On and Off-Road Tracks, and a local cul-de-sacs and parking lots.

Set-up Notes: We didn’t do anything special as far as setup goes. We did all the testing stock out of the box.

Build Quality: Out of the box we didn’t appear to have any issues till we started to run the vehicle. Just rolling it was much louder than it should of been. We double checked the gear mesh and didn’t initially see any problems, so we decided to run it, and figured whatever the issue would show itself. Sure enough after maybe a minute of running the pinion gear lost some teeth and we busted the motor shaft. It appears we had the wrong pitch pinion on the vehicle. Our guess is someone grabbed pinion out of the wrong box during assembly. We replaced the motor and pinion gear and it’s been good since. There were no other build quality issues, no leaking shocks or anything else that needed attention.

Turning: Turning really came down to the surface. On the smooth on-road track we were drifting corners, doing donuts, and having a blast trying to correct for the power this vehicle had. Off-road drifting wasn’t so easy. As soon as you broke the wheels loose you were going to be in some trouble which resulted into some painful wall slams.

Jumping: We did bring it to the off-road track and jumping was doable. Our biggest problem is that the vehicle rides pretty low, so jumping small was no problem, but the big air resulted in some pretty harsh landings. The Chassis and body were taking some serious abuse whenever we went big. The rally also seemed a little nose heavy. On the big jumps we were fighting to not go into the ground nose first.

Bumps/Whoops: The rough stuff was handled pretty well, but if you weren’t landing flat between the whoops it would bottom out. The suspension did ok in the bumps and rough.

On-Road: We had a blast drifting on-road. The vehicle really shines if you are looking to just have fun. If you were trying to put down some super fast laps you are going to need some different tires and some tweaking. If you were out there to have fun and pretend you were a mini Ken Block trying to go all RC Gymkhana, this vehicle would bring a smile to your face!

Grass: Grass wasn’t happening. It’s just too low to go anywhere.

Off-Road We mentioned some details about off-road. It is totally doable in the Ken Block Rally. You don’t want to be going huge, but the vehicle can do it, and take it. We got lucky that the track layout happened to be relatively smooth with only a few small jumps, a table top and maybe a double. Driving the track perfect wasn’t easy though. It was difficult to nail the landings, you were just happy when you landed it on all four and were able to keep driving.

Tires: The tires are about what we expected and wanted them to be. There was minimal wear on them after many drifting sessions and mega donuts. They were hard enough to give us big drifting turns, but had enough traction to keep us on the track.

Power: Serious power. The FLUX Vektor 4000KV motor was a rocket on 3S and had the ability to break the tires loose on demand. Acceleration and top speed were both fast.

Radio: The included HPI TF-40 seems to be a love it or hate it thing around the office. I think it’s a big improvement over previous rtr transmitters from HPI.

Broken Parts: We did end up trashing a pinion and motor shaft, but this was due to a gearing pitch issue. We haven’t broken anything else yet, and the rally has been slammed, bashed, jumped, rode hard and put away wet. We really expected some other broken parts by now, but nada.

Misc Notes:
HPI did a good job of making a scale rally car that’s fun to drive. We’d really like to see some sort of ‘rally’ class catch on that involved on-road, off-road, jumps, etc. Ken Block fans will dig the detail of the body, it looks good and gets attention anywhere we drive it. The bad gearing out of the box was a bummer. We have heard that this isn’t a problem right now, but was a small issue with the first handful out the door.

While the Velcro straps look cool, we did loose a battery during some of our harder bashing sessions. While it’s quick to get in and out with Velcro, and lets you put in any size pack without a problem, we are fans of the bar and screws of the Blitz to keep things secure.

It’s tough bringing the HPI Rally to a off-road track because the track just isn’t set up for the scale of the vehicle, but if you are adventurous, and have a few buddies with rally cars, you could probably make pretty fun custom course.

Summary:

A = Outstanding/Best in Class, B = Above Average, C = Average, D = Below Average, F = Horrific

Time To Bash: C We had some bad luck with the gearing out of the box, but 99% of the people shouldn’t have the issue we did.

Workability: B We got to experience working on the vehicle pretty early, and overall it was good. Most things were easy to get to.

Car Show Rating: A The body, the wheels, everything about it looks awesome.

Bash-A-Bility: B We have been beating on it good. Big air, wall slams, landings to pavement, and have had nothing break after our first fix. Strap those batteries tight!

Fun Factor: B The drifting has been fun. It’s not set up with true hard drift tires, but could be pretty easily. The amount of power the car has is more than enough to keep everyone happy. Jumping could be better, if you kept things tame and ‘to scale’ you’d be fine, but we don’t like to ‘go tame’.

Handling: C Handling is a tough one here. It’s not as good on road as a on-road car, and it’s not as good off road as a off-road. It does both well, which isn’t easy, but neither are great.

Value: C $480 isn’t peanuts. You do get a lot of power, durability and looks for your money though.

Parts Availability: C HPI has a few WR8 Vehicles now, so ordering parts online isn’t bad, but finding them at your local shop will be surprising. Our replacement parts took a while to come in.

BigSquid Rating: B- If your a Ken Block fan, a Rally fan, or a Gymkhana fan, you will want to look into the HPI WR8 KB Edition. It’s durable, fun to drive, and looks good doing it.

Need more pictures? Check out the unboxing photos HERE.

We got our hands on the new HPI Ken Block Rally WR8 Flux. A few people in the office have been waiting to get their hands on this one, so we are going to be drawing straws or just a flat out brawl to see who gets to do the review in the office. Till then, enjoy pictures.

Looking for more HPI News or maybe other unboxing pictures, hit the links.

The HPI Racing Ken Block WR8 FLUX finally gets official! We have been posting news about the Ken Block vehicle for a while now as bits and pieces were leaked out, but the official PR is finally here. We finally get to see under the body as well. When we saw it in person we couldn’t get our eyes underneath because we were told the ‘official battery straps’ were not final. We were not sure what the HPI spokespeople were talking about, but now we know!

Some details we may or may not of mentioned before:
4WD 1/8th scale based on the HPI WR8
Up to 3S Lipo can be run on the FPI Flux Vektor motor getting you to 60mph
The chassis has side wall/guards to help keep out rocks and other stuff.
Front and rear sway bars
Adjustable battery box with custom Ken Block logo Battery Straps
Waterproof steering servo
Flux Vapor ESC
3mm aluminum chassis
Licensed Replica fifteen53 Tarmac Wheels

The part number is 109313, and it should start to pop up in store computers soon, though an official price has not been announced.

Click MORE to check out the official HPI Ken Block Video..

We are really looking forward to this one!

There have not been that many good photos of the new HPI Ken Block vehicle except for the ones we posted, and a few people have asked if we had any more. So we dug deep to see if there were any we have not posted yet, and I believe this is the last of them. Enjoy, and look for more info coming soon on this ride!

What did we say in our HPI Savage XS Flux review? Find out right HERE.

For those living under a rock, here is Gymkhana 5:

Looking for other Ken Block news? Click HERE  for more KB News.