
You are browsing the archive.
Injora has released a new series of Steel Helical Gears for the Traxxas TRX-4M. Whether you want a replacement for the TRX-4M’s stock, plastic gears, or you’d rather apply overdrive or underdrive to your small-scale crawler, these gear options should have you covered. While there are other ways to adjust the speed and torque of your TRX-4M, these gears apply change [...]
The crew over at RPM has just dropped upgrade A-Arms for the mighty Losi Tenacity series of vehicles. RPM is known worldwide for their incredibly tough plastic parts and their new a-arms for the Tenacity are a great upgrade to help bomb-proof your rig. Check out these highlights- * Designed for strength and durability * 30° leading and trailing edges to prevent [...]
New from FMS Model is the 1/24 FCX24 Chevrolet K5 Blazer. The new K5 Blazer is a nicely scaled recreation of a 1970s classic. Check out these highlights- * Fully licensed by General Motors * Two speed transmission * Realistic 4-link suspension * High traction tires * Optimized wheelbase (139mm) * Available in three different colors * Hard plastic body * Remote control lighting system * Portal axles with [...]
Now shipping from APlastics is a 1/10 Charger SRT 2022 Clear Wide Body. This hot looking Charger comes in clear awaiting your custom paint scheme. Check out these highlights- * Made from a durable, clear Lexan * Bull bar available separately * Width – 200mm * Wheelbase – 259mm * Includes overspray film * Comes with light buckets * Fits – 1/10 touring and drift cars The [...]
New over at Spektrum are a pair of 7.4V 2S 130C Smart No Prep Drag Race LiPos. Featuring a 4000mAh model, as well as a 5000, both were designed for serious power output to get you down the track faster than your opponent. Here are the highlights- * Designed for 1/10 rc drag racing * High current IC5 connector * Durable ABS plastic [...]
Now shipping from JConcepts are Resealable Storage Bags. The new storage bags from JConcepts make it easy to organize your spare parts, tires, and other accessories in a sano fashion. Check out these highlights- * Storage Area – 13″ wide x 14″ tall (33cm x 35cm) * Lightweight, durable material with handle * 10 pieces included per package * Speed Laboratory design and graphics * [...]
Injora’s list of upgrades for the Traxxas TRX-4M now includes Aluminum Flex Blades (#4M-33). If you want next-level performance from your 1/18-scale crawler, these suspension extensions should help you hit the mark. Made from CNC-machined aluminum, these front, and rear flex blades allow for a greater range of motion from the suspension, letting you take on more challenging terrain and obstacles. [...]
Coming to a hobby shop near you soon are Pro-Line 1/6 Dumont 5.7” Paddle Tires Mounted on Raid Wheels. These beast sized paddle tires are the perfect upgrade for your ARRMA Kraton 8S, or other large scale bash machine. Here are more highlights- * Designed for sand, snow, and other soft surfaces * Named after the Dumont Sand Dunes in California * Uses [...]
Hobbywing AXE R2-FOC or Castle Creations Mamba X – you might wonder which one to spend your money on? So do I. Or, rather, so did I until I tried them both. Ever since I put a Castle Mamba X in my Axial Yeti in 2016, I have been fond of the system, to the point where I now own [...]
Coming soon from the crew at Pro-Line are Hot Lap 2.2″/3.0″ Dirt Oval SC Mod Tires. The Hot Lap tires represent a new generation of dirt oval tire from Pro-Line and were designed for performance, consistency, and long-lasting wear characteristics. Here are more highlights- * Next-generation tread pattern * Deep, geometric grooved tread for increased forward traction * Re-usable and water-proof closed cell [...]
New from Pro-Line is a full line-up of Ultra-Slim LED Light Bar Kits. With 4 units available ranging from 2″ to 6″ in length, the new LED light bar kits are an easy scale upgrade for your rig. Here are more highlights- * Low-profile, highly detailed injection-molded housing * Super-bright strip of LEDs * Can be run off 5-12 volts DC * Lens on [...]
For all you ARRMA Kraton 8S drivers out there, Pro-Line has just announced 1/6 Masher X HP Belted 5.7” Tires Mounted on Raid Wheels. Pro-Line’s Masher monster truck tires have been a favorite among bashers for many years, now you can get them super-sized to fit your large scaler. Here are the highlights- * Designed to be lightweight, belted, and extremely [...]
The crew at Pro-Line has dropped new Reaction Rear Tires and Front Runner Front Tires for the 1/16th scaled Losi Mini Drag Car. These high performance drag tires were designed specifically for the 1/16th drag race scene. Check out these highlights- * Mounted on Showtime black/silver wheels * Pre-Mounted for your convenience * Wide contact patch on the rear tires * Designed to increase [...]
Hello everyone and Happy Thursday! I just had my first monster truck racing weekend of 2023 and got to get my fleet dirty! I want to focus on my LMT’s here, though. Both are quite a bit different from each other given they are the same platform, but both trucks are my two favorite r/c’s that I currently own. Let’s start with [...]
Over at PROTOform they are now offering their popular 2021 Ford Mustang GT Body in a Pre-Painted Version for the ARRMA Vendetta and Infraction 3S/MEGA. With hot scale looks, and the convenience of being pre-painted, this Mustang body makes it fast and easy to give your car a facelift. Here are more highlights- * Painted in a stunning Metallic Blue & [...]