FEATURED
You are browsing the archive.
Traxxas Video – Rock N’ Roll With The X-Maxx!
Freshly uploaded by Traxxas is a Rock N’ Roll With The X-Maxx video. Watch below to see the legendary Traxxas X-Maxx monster truck sending it huge over jumps and absolutely blasting around corners. Featuring 8S brushless power, huge tires, and massive suspension travel, the X-Maxx is more than ready for extreme bashing. You can use this link to get full details [...]
Tamiya 1/10 The Falcon (2026) Limited Edition Kit
Coming soon from Tamiya is the 1/10th scaled The Falcon (2026) Limited Edition Kit. The Falcon is an iconic buggy from Tamiya which was first released way back in 1986, but has been upgraded for its 2026 re-release. Here’s the highlights- * Universal shafts with ball bearings * Updated stickers that retain the spirit of the original Falcon * Classic 0.7mm clear polycarbonate [...]
- 9/8/2026
- 6:28 pm
- New Products
- By: Tim Mohr
Injora Brass Diff Covers for the Redcat Vertex-10/10W
New from Injora is a set of Brass Diff Covers (VER10–04) for the Redcat Vertex-10 and Vertex-10W, which offer improved durability and added weight for your 1/10-scale performance R/C crawler. Made of durable, machined brass, these diff covers will add a decent amount of down-low weight to the front and rear of your Vertex-10,. These steering knuckles feature an anodized black finish [...]
- 9/8/2026
- 3:30 pm
- New Products
- By: Tim Gluth
Team Corally Video – 5 Things To Check After Every Bash
Over at Team Corally they have uploaded a 5 Things To Check After Every Bash video. The short video below goes over some of the common things that you should check after a good old fashioned bashing session. From how to inspect your tires, to checking your diffs and shocks, the Corally video is a great watch for new hobbyists, [...]
Atomic RC 1/28 MFX F1 Chassis Kit
Now shipping from Atomic RC is the 1/28th scaled MFX F1 Chassis Kit. This high-end 1/28 F1 kit is designed for serious speed and precise handling. Here’s some highlights- * Direct drive steering system * Extremely low center of gravity design * Wheelbase – 115mm * Width – 76mm * Carbon fiber chassis * Compatible with 24mm wide batteries * Includes servo saver * Caster Angle arm mount [...]
- 9/4/2026
- 5:18 pm
- New Products
- By: Tim Mohr
Roche Rapide 1/12 P12V3 Pan Car Kit
Over at Roche Rapide they have released details on their upcoming 1/12th scaled P12V3 Pan Car Kit. Version 3 of the Roche P12 is loaded with updates for more speed and durability. Check out these highlights- * 3D printed front bumper * New graphite lower arms * 1.0mm upper brace * New narrow 7075 aluminum chassis * New aluminum battery tray * New long side damper [...]
- 9/4/2026
- 3:33 pm
- New Products
- By: Tim Mohr
The Backyard – What Makes a Good Re-Release?
Greetings all and Happy Friday! Welcome to The Backyard! Friends, we are living in the golden age of the re-release. Tamiya and Team Associated in particular have been digging deep into their respective back catalogs in recent years, bringing back all sorts of vehicles that many of us grew up building, racing, bashing, or simply staring at longingly in hobby shop [...]
Injora Aluminum Rear Portal Drive Housings for the Redcat Ve…
If you’re a Redcat Vertex-10 or Vertex-10W owner who’s been waiting for upgrades to arrive for your crawler, the folks at Injora have you covered. They’ve released a selection of upgrade items, including a set of Aluminum Rear Portal Drive Housings (VER10–05), which offer improved durability, not to mention a style boost, for your 1/10-scale R/C crawler. Made of durable, machined [...]
- 9/4/2026
- 11:05 am
- New Products
- By: Tim Gluth
JConcepts Announces Vintage Flat Wings
The crew at JConcepts have released details on a pair of new Vintage Flat Wings. Designed for 1/10 vintage buggy racing, these old school wings are the perfect touch to finish up your next retro buggy build. Here’s the highlights- * #0538 – 7″ RC10 Vintage Flat Wing * #0539 – 5.5″ RC10 Vintage Flat Wing * Classic 1980s, 1990s design inspiration * JConcepts [...]
- 9/3/2026
- 7:12 pm
- New Products
- By: Tim Mohr
JConcepts Top Hat LP JHCS Titanium Screws
The good folks over at JConcepts have announced Top Hat LP JHCS Titanium Screws. These ultra-trick looking screws come in sets of 4 and are available in blue or black. Here’s the highlights- * Made from titanium * JConcepts top hat LP design * 6.75mm head diameter with low-profile hat * Available in burnt blue and stealth black anodizing * Silver highlighting throughout the screw * [...]
- 9/3/2026
- 5:38 pm
- New Products
- By: Tim Mohr
Team Associated 1/10 RC10 4WD Jay Halsey Chain Drive Edition…
New from Team Associated is the 1/10th scaled RC10 4WD Jay Halsey Chain Drive Edition Kit. This blast from the past comes with legit chain drive to give you that true old school feel while racing. Here’s the highlights- * New stainless steel heavy duty chain * New hardened chain sprocket gears * New carbon fiber chain separator system * New front CVA axles [...]
- 9/3/2026
- 3:49 pm
- New Products
- By: Tim Mohr
-
Tamiya 1/10 DN-01 SR Chassis Kit
Just announced by Tamiya is the 1/10 DN-01 SR Chassis Kit. The DN-01 SR is loaded with option parts to make it a contender right out of the box. Here’s the highlights- * Slipper clutch for improved stability * Aluminum suspension mounts * Aluminum motor plate * Universal drive shafts * Hex wheel hubs for a wider choice of wheels * TRF201 body and rear wing * [...]
SWORKz 1/8 Nitro S35-5 & Electric S35-5e Buggy Kits
Over at SWORKz they have announced the 1/8th scaled S35-5 Nitro and S35-5e Electric Buggy Kits. These are the next generation race buggies from SWORKz and have been highly updated to improve speed, durability, and tuning ability. Here’s some highlights- * Ships in September * 7075 hard anodized chassis * Quick release gearbox system * Updated toe plates with square inserts * Adjustable diff and [...]
- 9/2/2026
- 7:06 pm
- New Products
- By: Tim Mohr
Hobao Racing 1/8 Hyper VS2 Electric Truggy RTR
After a bit of teasing, Hobao Racing has released full details on their upcoming 1/8 Hyper VS2 Electric Truggy. No matter if you are bashing or racing, the VS2 is ready for serious fun. Here’s some highlights- * All driveshafts and cups are made of hardened steel * New 45T machined steel spur gear and 10T/46T pinion and ring gear set * New [...]
- 9/2/2026
- 7:06 pm
- New Products
- By: Tim Mohr
Injora 1.0" Turbine Deep Dish Micro Crawler Wheels With -4.7…
New from Injora are their 1.0" Turbine Deep Dish Micro Crawler Wheels With -4.7mm Offset (W1015PU) for 1/18 and 1/24-scale R/C crawlers. These wheels have a definite old-school vibe, but they should look right at home on just about any crawler body style. Made of machined aluminum and brass, these wheels feature a multi-piece design with inner and outer faces (aluminum) [...]
- 9/2/2026
- 3:15 pm
- New Products
- By: Tim Gluth
