For Bashers, By Bashers!

Search Results for "goblin"

Peeking into the Goblin 380 Helicopter Kit

The moment has finally arrived: I got my hands on the SAB Heli Division Goblin 380 helicopter kit. I even have all my electronics already: servos, ESC, motor, battery, and flybarless unit. I cannot wait to start building, but for now see my choices in electronics and take a peek into the contents of this kit in the pictures below: Need more SAB [...]

Read More...

Raging Rotors Build Report: Goblin 570 Kit from SAB Helidivi…

OK, so I may have done a lot of building these past few months (idle hands blah blah blah), but I love getting dirty and what better way than a kit? Thanks to my trip to IRCHA, I got my opportunity with the SAB Helidivision Goblin 570. This has been my baby, and still is, so here is the skinny of what I [...]

Read More...

Raging Rotors: Beware the Goblin, or, Things I Learned Build…

All the way back in August, I got my hands on a Goblin 570 from SAB Helidivision thanks to my friends at PrestigeRC/HeliDirect. Over the past few months, I have been diligently working on it while getting more and more excited for flying season to start this now snowy 2015. I have only built a Baja 5B SS in all my time in RC, [...]

Read More...

IRCHA Exclusive News: New 380 Size 3D Helicopter from SAB Go…

Hot off the press at IRCHA 2014 Jamboree: SAB Heli Division adds one more collective pitch stunt helicopter to their line: a 380 Size (380mm approx blade size)! Called the Goblin 380, this helicopter only has 38 parts outside of bolts/bearings, which is the lowest part count for a helicopter of that size, EVER! Built to handle a 6S LiPo power system, this helicopter [...]

Read More...

Losing grip – turning forty

I believe this is my fortieth column, in almost as many weeks. I’ve missed two weeks I think, both of them around the time when I changed jobs and moved some ten thousand miles.  A pretty good run so far, I dare say. Who’d have thought that, a year ago? Cubby, maybe, since he was the one who first approached [...]

Read More...

Losing grip – color choice

G’day fellow drifters, as well as all you bashers out there that really should give drifting a go. By all means, do a couple of speed runs and burn some rubber with your Arrma Infraction. Then, when your 6S batteries are out of juice, grab your drifter for some relaxing, beautiful and smooth drifting. All in the same parking lot. [...]

Read More...

Raging Rotors: Yo, Quad Daddy-O!

Again, the news is filled with so much trouble in regards to Multirotors/Quadcopters/Drones. Brian just saw someone follow highway traffic, a man in the Illinois suburbs is being investigated by the FAA for rule violations when doing a quadcopter video of Christmas lights, and a government employee has now crashed on his boss’s White House lawn. Ideally I’d love to send [...]

Read More...

Raging Rotors: What I REALLY want for Christmas…

Hello, and Happy Thanksgiving Eve to you all! It was neat to see what everyone wanted under the tree in this week’s Cub Report, and yes, I did ask for an Arrma Typhon. That truck is ridiculous! Yet, I wasn’t ready to spoil my whole list, because that’s my job. Here are the top things on my Christmas list this year, [...]

Read More...

Raging Rotors: Meet QX3-PO!

So maybe I’m excited that principal photography is done for the new Star Wars movie, but it was nice to see that Blade Helicopters announced last week the new 350 QX3 and 350 QX3 AP Combo for all to enjoy even more precision in their quadcopter flying and aerial photography. So the question must be asked: “What is new to this quad that makes it different from [...]

Read More...

Raging Rotors: Holy Helicopter Kit, Batman!

Another week, another fun installment of Raging Rotors! Granted I’m not bringing atomic batteries to power, but I have a project that I have been working on since IRCHA this past August. As I mentioned, I did acquire a SAB Heli Division Goblin 570 helicopter kit and have been diligently working on it in my free time. I have to say, it has [...]

Read More...

New Flybarless Unit from Spartan RC! The Vortex VX1e

Hey guys, during my time at the IRCHA Jamboree, I got a neat little scratch card that ushered me quickly to the Spartan RC booth. I won myself a new helicopter gyro system for flybarless 3D helicopters called the Vortex VX1e. Newly released for purchase first at the Jamboree, I got to see what makes it a great system. Here are the details from SpartanRC: Tail – [...]

Read More...

Raging Rotors Recap: IRCHA Jamboree 2014

If you didn’t see it already, I took a lot of pictures over last weekend when I was at the IRCHA Jamboree 2014. I even walked out of there a winner! In a lot of cases, pictures do the Jamboree justice, but there still is a lot one can talk about that the pictures can’t start to describe. I thought I’d make [...]

Read More...

Reviews