For Bashers, By Bashers!

ARRMA Senton 6S 4WD Short Course RTR

We just got the first details on the new ARRMA RC Senton Short Course Truck. The Senton is 4WD, with a brushless system that can handle up to a 6S LiPo.

Some specs:
Length: 22″ (560mm)
Width: 11.6″ (295mm)
Height: 7.67″ (195mm)
Wheelbase: 12.5-12.67″ (318-322mm)
Weight: 127oz (3.6kg)
Chassis: Aluminum, with side impact bumpers
Drive: Four wheel with CVD driveshafts
Radio: 2.4GHz
Steering Servo: ADS-15M metal geared with 208 oz/in torque, .12 sec @ 60° transit speed
Motor: 2050kV brushless
ESC: Waterproof 180A with built-in cooling fan
Shocks: Aluminum body, oil filled, big bore
Shock Towers: 0.20″ (5mm) thick aluminum
Suspension: Reinforced hangers with inboard hinge pins that are less likely to pop out
Body: Trimmed and painted
Motor Mount: Aluminum
Gearboxes: Fully sealed
Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis

It sounds like they are aiming for a mid February release, and we are looking forward to getting our hands on one!

For more details check out this link over on the official ARRMA website. (Note, they have not posted the info to their main site yet.)

You can Pre-Order right now over at this Tower Hobbies Link!

Click Right Here for more ARRMA news on BigSquidRC.


Post Info

Posted by in Featured Posts, New Products on Sunday, January 11th, 2015 at 6:27 pm