FEATURED
You are browsing the archive.
Injora Brass Front Portal Knuckles for the Redcat Vertex-10/…
If you’re a Redcat Vertex-10 or Vertex-10W owner who’s been waiting for brass performance upgrades to arrive for your crawler, the folks at Injora have your back. They’ve released a selection of upgrade items, including a set of Brass Front Portal Knuckles (VER10–01), which offer improved durability and stability for your 1/10-scale R/C crawler. Made of durable, machined brass, these front [...]
- 9/9/2026
- 2:29 pm
- New Products
- By: Tim Gluth
Injora Brass Diff Covers for the Redcat Vertex-10/10W
New from Injora is a set of Brass Diff Covers (VER10–04) for the Redcat Vertex-10 and Vertex-10W, which offer improved durability and added weight for your 1/10-scale performance R/C crawler. Made of durable, machined brass, these diff covers will add a decent amount of down-low weight to the front and rear of your Vertex-10,. These steering knuckles feature an anodized black finish [...]
- 9/8/2026
- 3:30 pm
- New Products
- By: Tim Gluth
Injora Aluminum Rear Portal Drive Housings for the Redcat Ve…
If you’re a Redcat Vertex-10 or Vertex-10W owner who’s been waiting for upgrades to arrive for your crawler, the folks at Injora have you covered. They’ve released a selection of upgrade items, including a set of Aluminum Rear Portal Drive Housings (VER10–05), which offer improved durability, not to mention a style boost, for your 1/10-scale R/C crawler. Made of durable, machined [...]
- 9/4/2026
- 11:05 am
- New Products
- By: Tim Gluth
Injora 1.0" Turbine Deep Dish Micro Crawler Wheels With -4.7…
New from Injora are their 1.0" Turbine Deep Dish Micro Crawler Wheels With -4.7mm Offset (W1015PU) for 1/18 and 1/24-scale R/C crawlers. These wheels have a definite old-school vibe, but they should look right at home on just about any crawler body style. Made of machined aluminum and brass, these wheels feature a multi-piece design with inner and outer faces (aluminum) [...]
- 9/2/2026
- 3:15 pm
- New Products
- By: Tim Gluth
Injora MBL32-NANO Brushless ESC & 1616 4800KV Green Viper Mo…
Injora has introduced its second brushless motor for the Axial SCX30, and this one packs a punch. While the original Green Viper motor was no slouch, 1616 4800KV Green Viper is not only smaller, but it has a higher KV rating for faster overall top speed. Paired with the MBL32-NANO Brushless ESC, this new power setup should transform your micro R/C [...]
- 9/1/2026
- 12:11 pm
- New Products
- By: Tim Gluth
Injora IR90-24 Polycarbonate Body for the SCX24 (155mm Wheel…
If you’re looking for a lightweight body for your performance-focused SCX24 build, Injora has something for you: the IR90–24. This pre-cut body features several color options, and can also be painted to give you a truly customized crawler. Designed to fit the SCX24 models with a 155mm wheelbase (like the Jeep Gladiator and Dodge Power Wagon), this body can mount with [...]
- 8/31/2026
- 1:35 pm
- New Products
- By: Tim Gluth
Injora 1.9″ Turbine Deep Dish R/C Crawler Wheels
New from Injora are their 1.9" Turbine Deep Dish Wheels (W1915) for 1/10-scale R/C crawlers and trail trucks. While these wheels have an old-school design, they should look right at home on just about any model of crawler. Made of machined aluminum, these wheels feature a multi-piece design with inner and outer faces, an inner ring/barrel, and a wheel hub. Three [...]
- 8/18/2026
- 12:10 pm
- New Products
- By: Tim Gluth
Yeah Racing Aluminum Adjustable Bullet Plug Grips
If you run batteries with bullet plug connectors, Yeah Racing has a new set of Aluminum Adjustable Bullet Plug Grips that make removing battery wires a breeze. The machined aluminum plug grips feature a stylish design with a large enough diameter to grip to help you easily remove your batteries’ bullet plugs. The aluminum grip/nut also acts as a heat sink [...]
- 8/14/2026
- 12:56 pm
- New Products
- By: Tim Gluth
Redcat Ascent-32 V2 (Micro-crawler Boogaloo)
Redcat has announced the release of its revamped Ascent-32 V2 micro R/C crawler. With the original Ascent-32 released less than a year ago, they’ve listened to feedback and have tuned and tweaked this model to offer a better crawling experience, whether you’re exploring indoors or out. While the first generation of the Ascent-32 had plenty of power, it needed a little [...]
- 8/13/2026
- 1:30 pm
- New Products
- By: Tim Gluth
Injora C60 Axles with Double Joint Shafts for the UTB10 Capr…
New from Injora are their C60 Axles with Double Joint Shafts for the Axial UTB10 Capra. These solid and durable axles not only look great, but they’ll improve your Capra’s turning radius and traction performance thanks to the front axles’ double-jointed design and brass steering knuckles. Other features of this axle set include a behind-the-axle servo mount, a scale-looking double-ended steering [...]
- 8/7/2026
- 6:59 pm
- New Products
- By: Tim Gluth
Injora Planet Axles with Double Joint Shafts for the H10 Opt…
New from Injora are their Planet Axles with Double Joint Shafts for the Vanquish Products H10 Optic. These sleek and durable axles not only look amazing, but they’ll improve your Optic’s turning radius and traction performance thanks to the front axles’ double-jointed design and brass steering knuckles. Other features of this axle set include a behind-the-axle servo mount, a scale-looking double-ended [...]
- 8/5/2026
- 12:50 pm
- New Products
- By: Tim Gluth
Knight Customs 3D-Printable Raider Hood for the Terra Recon …
If you’ve outfitted your Vanquish Products H10 Optic with Knight Customs’ Terra Recon Conversion Kit, here’s another printable option to let you customize your trail rig even further. The Terra Recon Raider Hood offers an aggressive, performance-focused update to the 3D-printed Terra Recon body set, while also providing additional clearance for a detailed, scale engine. This 3D-Printable Terra Recon Raider Hood is [...]
- 7/28/2026
- 11:36 am
- New Products
- By: Tim Gluth
Knight Customs 3D-Printable Universal Drift Interior Detail …
If you’re ready to take your R/C drift car to the next level of visual detail, check out this new release from Knight Customs. Their 3D-Printable Universal Drift Interior Detail Set will let you equip your slideways ride with a detailed interior, giving it an instant boost of character. Designed to fit most 1/10-scale radio-controlled drift car bodies, this interior detail [...]
- 7/20/2026
- 1:47 pm
- New Products
- By: Tim Gluth
Redcat Vertex-10 RTR & Slider Chassis Kit
Redcat has unveiled its newest performance-focused crawler line, the Vertex-10. With four options in the product lineup, the first two appear to be geared toward R/C crawling enthusiasts seeking a solid performer with trail-truck DNA. The Vertex-10, offered as both an RTR and a pre-built slider, is more than a scaled-down version of the mega-sized Vertex-6. This 1/10-scale crawler platform prioritizes [...]
- 7/10/2026
- 4:39 pm
- New Products
- By: Tim Gluth
Injora Aluminum Skid Plate for the Redcat Ascent-18 Apex
New from Injora is their Aluminum Skid Plate for the Redcat Ascent-18 Apex. If you want to update the durability and style of your 1/18-scale crawler without adding more weight to the chassis, this skid plate is a great way to do just that. Made of durable machined aluminum, this skid plate upgrade for the Ascent-18 Apex features a black anodized [...]
- 7/9/2026
- 4:44 pm
- New Products
- By: Tim Gluth
