
You are browsing the archive.
The crew at Team Corally have uploaded a new Kagama – Epic Jumps, Durable to the Max! promotional video. The Kagama 4wd monster truck was designed specifically for hardcore backyard bashing. With massive suspension components and a burly 6S brushless power system, the Kagama has the raw power for huge airtime, with the suspension to handle the landing. Watch the [...]
New over at AKA are Rivet 2.2″/3.0″ Carpet Short Course Tires. Designed for indoor carpet racing, the Rivet race tires can help put you on the top step of the podium. Here are the highlights- * Dense, small pin tread pattern * Unique pin design * Designed for carpet racing * Ideal for tight indoor tracks * Includes closed cell foam inserts * Available in two [...]
Now shipping from Fair RC is the FCX24 Smasher RTR Camouflage Mod w/Batrazzi Tracks. This modified version of the Smasher comes with a special camo paint scheme and off-road tracks for when the going gets gnarly. Here are more highlights- * Rusted camouflage livery * Includes tracks as well as monster truck tires * Two speed transmission * High clearance portal style axles * Four [...]
Now shipping from JConcepts is an S2 Schumacher LD3 Clear Body. The JC crew has worked up one of their high-end S2 series race bodies for the freshly announced Schumacher LD3. Check out these highlights- * Low profile design * Aggressive progressive cab design to increase front-end downforce * Channeled roof increases rigidity of cockpit * Dual side-window design * Upper side-pods have vents to [...]
The good folks over at Pro-Line have dropped a 1/7 Pre-Cut 2007 Chevy Silverado Clear Body for the Traxxas Unlimited Desert Racer. The Silverado has been nicely scaled and is fully licensed. Check out these highlights- * Classic “Cateye” Chevy for the Unlimited Desert Racer platform * Aggressively flared fenders for a muscular stance * Bolts directly to the stock UDR cage * Fully [...]
Coming soon from Pro-Line is the 1/10 Coyote Grande Clear Body. Sized to fit 12.3″ wheelbase scale crawlers, the Coyote Grande is a high performance competition rock crawling body. Here are the highlights- * Fresh take on the original Coyote * Aimed at Class 2 and Class 3 rock crawlers * Fresh 1980’s SUV-styling * Pinched front end with dove-tailed rear * Wheel arches have [...]
New from Pro-Line is a Twin I-Beam 2WD Pre-Runner Suspension Conversion Kit for the SCX10 I/II. This ultra-trick conversion kit comes with everything needed to install true I-Beam suspension on your SCX10 I/II. Check out these highlights- * Transforms your SCX10 I/II into a 2WD Desert Truck * Highly detailed, durable, scale-looking conversion kit * Molded I-Beam arms, radium arms, and trailing arms * [...]
Just announced by ARRMA is the 1/7th Scaled Big Rock 6S 4X4 BLX Monster Truck RTR. This giant version of the Big Rock comes with a burly 6S brushless power system, to go with it’s beefy 4wd chassis. Check out these highlights- * Big Rock supersized to 1/7 scale * Loaded with ARRMA durability and performance * Highly detailed, rugged truck body * Three [...]
New over at Batrazzi RC is a Car Stand Repair Workstation. The new workstation from Batrazzi is designed to work with 1/10th to 1/8th scaled vehicles and can make wrenching a whole lot easier. Check out these highlights- * Fits 1/10 and 1/8 vehicles * Five different height adjustments * 130 x 160mm base * Non-slip top * 360-degrees of rotation * Easy to assemble The [...]
Being teased now by Tamiya is the 1/10 Toyota Celica GT-Four RC (ST185) Kit. The Toyota Celica was a best seller worldwide for decades and the Tamiya version has been nicely scaled down from the 1:1 original. Here are some highlights- * Comes on Tamiya’s TT-02 chassis * Shaft driven 4wd * Double wishbone suspension * Coil damped suspension system The Tamiya Toyota Celica GT-Four [...]
Over at JConcepts they have announced Scalloped 2.2″ Carpet/Turf Tire Inserts. The scalloped inserts help to increase rolling speed, while adding support to the center section of the tire. Here are the highlights- * Soft and pliable open cell material * Increased sidewall support * Open cell material, scalloped inner cuts * Bright white material for easy identification * 2 pieces included per package The JConcepts [...]
Down in Texas the crew at Traxxas has announced that their Slash RTR will soon ship with a new BL-2s Brushless Power System. The Traxxas Slash is a truly iconic rc car and their new BL-2s brushless power system gives it a big boost in power, without a big price increase. Check out these highlights- * BL-2s brushless system has 15% [...]
Cross RC is all about taking scale realism to the next level and to help prove this they are now teasing their upcoming 1/8 EMO X3 Tow Truck Kit. This burly tow truck is loaded with scale metal parts and even comes with a working winch. Coming in at 8th scale, and with a tough 4wd system, the EMO X3 [...]
Now being teased by Tamiya is a 1/10 Toyota Supra (JZA80) Kit. The 1990s Toyota Supras are legendary sports cars and the Tamiya version has been impeccably scaled down from the 1:1 version. Under the hood you’ll find a 2wd BT-01 Tamiya chassis that is easy to build and drive. Here are more highlights- * Lightweight clear polycarbonate body * One-piece 10 [...]
New over at Exotek are Carbon Fiber Upgrades for the Team Associated Reflex 14 series. These high-end carbon fiber goodies help to reduce weight, increase strength, while also looking oh-so trick. Here are the highlights- Heavy Duty Carbon Fiber Front Shock Tower Reflex 14B/T/MT * Racing grade 3mm carbon fiber shock tower * Heavy duty and extra stiff for improved suspension action * Lightweight [...]