FEATURED
You are browsing the archive.
DSM Off-Road Rock Rod Bouncer TRX-4M Chassis
Pre-ordering is now open for the DSM Off-Road Rock Rod Bouncer TRX-4M Chassis. This affordable chassis upgrade turns your stock rig into a highly capable rock bouncer. Check out these highlights- * Rock bouncer conversion chassis * Includes everything needed for the conversion * Made from 6061 aluminum and durable nylon * Adds extra clearance for greater approach and departure angles * Lighter than the [...]
- 2/8/2023
- 1:10 pm
- New Products
- By: Tim Mohr
Jetko Power 2.2″ Challenger Carpet Race Tires for 1/10 Buggy
Over at Jetko Power they are promoting their new 2.2″ Challenger Carpet Race Tires for 1/10 buggies. The Challengers were specifically designed for carpet track dominance and are sized to fit 4WD front, as well as 2WD & 4WD buggy rear. Here are the highlights- * Redesigned carcass shape that provides more steering in low speed corners * Also designed for more [...]
- 2/7/2023
- 6:46 pm
- New Products
- By: Tim Mohr
RC4WD Centerline 1.55″ Scorpion Deep Dish Wheels
Now shipping from RC4WD are Centerline 1.55″ Scorpion Deep Dish Wheels. These high-end aluminum wheels are fully licensed by Centerline Wheel Company and are the perfect upgrade for your 1.55″ rig. Here are the highlights- * Made from CNC machined billet aluminum * Tough silver anodized finsish * Standard 12mm wheel hex * Outer Diameter – 1.79″/45.5mm * Width – 1.10″/28.0mm * Negative Offset – 0.37″/9.36mm * [...]
- 2/7/2023
- 11:54 am
- New Products
- By: Tim Mohr
Powerhobby LCG Carbon Fiber Chassis for the SCX24
New from Powerhobby is a Low Center of Gravity Carbon Fiber Chassis for the Axial Racing SCX24. To help improve performance on your SCX24 Jeep Gladiator, the crew at Powerhobby have worked up this very trick carbon fiber chassis. The carbon fiber chassis helps to shave some weight, while also giving your rig a massive boost of drip. The Powerhobby [...]
DSM Off-Road Announces Ascend TRX-4M Competition Chassis
The crew at DSM Off-Road has officially announced their upcoming Ascend Traxxas TRX-4M Competition Chassis. Designed for premium performance, the new Ascend upgrade chassis turns your stock TRX-4M into a full-on competition crawler. Here are the highlights- * Parts made from a durable 6061 aluminum and PA-12 nylon * Adds extra clearance for greater approach and departure angles * Much lighter than the [...]
- 2/6/2023
- 4:54 pm
- New Products
- By: Tim Mohr
Teaser – Sparko Racing 1/8 Formula Eight Nitro Buggy Kit
Over at Sparko Racing they have dropped a few new teaser images of their upcoming 1/8 Formula 8 Nitro Buggy Kit. 1/8 nitro buggies are the highest form of rc dirt racing with multiple manufacturers in the fight for top dog. The new Formula 8 from Sparko was designed from the ground up for high-end performance, but we’ll have to [...]
- 2/6/2023
- 3:37 pm
- New Products
- By: Tim Mohr
Video - Blackout Crawler With The Traxxas TRX-4 Land Rover D…
New from Traxxas is a Blackout Crawler Video starring the Traxxas TRX-4 Land Rover Defender. The highly capable TRX-4 Land Rover Defender is a great choice for hitting the trails. Watch below to see just how realistic the TRX-4 Land Rover looks while out on the trail, or while cruising the beach. With waterproof electronics and high clearance portal axles, [...]
Spektrum XT2000 Tire Warmer
Over at Spektrum they have now gotten into the tire warmer game! New from Spektrum is the XT2000 Tire Warmer. Made for the racing crowd, the XT2000 is an easy way of getting your tires up to temperature before the race starts. Here are the highlights- * Full coverage tire wraps inspired by F1 racing * Powered by 3 or 4S LiPo [...]
- 2/6/2023
- 10:43 am
- New Products
- By: Tim Mohr
Hitec RDX2 1000 Battery Charger & Optional AD350 Discharger
Our good friends over at Hitec have just announced the RDX2 1000 Battery Charger & Optional AD350 Discharger. The RDX2 1000 is a true powerhouse featuring up to a 35 amp charge rate! The optional AD350 discharger also brings some serious performance with the ability to discharge at up to 40 amps! Here are more highlights- * AC/DC powerhouse designed to [...]
- 2/3/2023
- 6:57 pm
- New Products
- By: Tim Mohr
Tamiya Toyota GAZOO Racing WRT/GR Yaris Rally1 Hybrid
New from Tamiya is a Toyota GAZOO Racing WRT/GR Yaris Rally1 Hybrid Kit. After one glance at the pictures, we have to say that is one hot looking Yaris! Nicely scaled down from the original, the Tamiya Gazoo Racing Yaris Rally1 is perfect for backyard rally car runs, or for doing hot laps around your cul-de-sac. Here are the highlights- * [...]
- 2/3/2023
- 4:00 pm
- New Products
- By: Tim Mohr
Tamiya 1/10 2002 Mercedes-Benz CLK AMG Racing Version
The crew at Tamiya has announced their upcoming 1/10 2002 Mercedes-Benz CLK AMG Racing Version Kit. This version of the CLK AMG features enlarged fenders and a rear wing for a racing style look. Here are the highlights- * Shaft driven 4WD TT-02 chassis * Lightweight 1.0mm thick polycarbonate body. * Molded side mirrors and rear wing * 16-spoke silver color wheels * Racing slick [...]
- 2/3/2023
- 1:51 pm
- New Products
- By: Tim Mohr
Tamiya Scania 770 S 8X4/4 Full Option Kit
Recently announced by Tamiya is the Scania 770 S 8X4/4 Full Option Kit. This incredibly scale realistic semi-truck features double-axle 4-wheel drive in the rear, with double-axle 4-wheel steering up front. Here are more highlights- * 1/14th scale kit * Width – 196mm * Cab authentically recreated by precise injection molding * Detailed auxiliary machinery tower, fuel tank, and air tank * Motor and transmission [...]
- 2/3/2023
- 11:29 am
- New Products
- By: Tim Mohr
Tamiya 1/10 Toyota Land Cruiser 300 w/ CC-02L Chassis
For all you Land Cruiser fans out there, check out the upcoming 1/10 Toyota Land Cruiser 300 from Tamiya. Sporting a highly scale detailed polycarbonate body that sits on Tamiya’s CC-02L chassis, their new Land Cruiser is sure to make a big splash at your local bashing/trailing spot! Features include plastic molded scale parts, as well as stock looking [...]
- 2/3/2023
- 11:23 am
- New Products
- By: Tim Mohr
Kyosho 1/8 Inferno MP9 TKI4 V2 .21 Nitro Powered 4WD Buggy R…
Shipping soon from Kyosho is the 1/8th scaled Inferno MP9 TKI4 V2 .21 Nitro Powered 4WD Buggy Readyset. If you are looking for high-end performance, without having to use a bunch of time building a kit, the new Readyset version of the MP9 TKI4 V2 is a fast and easy way to get on the track. Check out these highlights- * [...]
- 2/2/2023
- 5:23 pm
- New Products
- By: Tim Mohr
Tamiya 1/10 Porsche 911 GT3 (992) Kit
Coming soon from Tamiya is the 1/10th scaled Porsche 911 GT3 (992) Kit. This hot looking Porsche has been nicely scaled from the original and comes on Tamiya’s easy to drive 4WD TT-02 chassis. Here are more highlights- * Highly detailed polycarbonate body * Beginner friendly and highly customizable TT-02 chassis * Shaft driven 4WD * Identical left and right suspension arms & uprights * [...]
