FEATURED
You are browsing the archive.
Tattu TA1200U Charger For 6S/12S/14S Lipo Batteries
New over at Tattu RC is the beefy TA1200U Charger For 6S/12S/14S Lipo Batteries. This monster of a battery charger has a maximum charge rate of 30 amps and can charge packs up to 14S in cell count. Here are more highlights- * Capable of charging 2 sets of lithium batteries simultaneously * Maximum output 750W under 100-120V, 1200W under 180-240V [...]
- 6/7/2022
- 5:44 pm
- New Products
- By: Tim Mohr
New Livery For The Carisma SCA-1E Ford F-150 2.1 Spec RTR Bl…
Over at Carisma they have announced their SCA-1E Ford F-150 2.1 Spec RTR Black with New Livery. The mighty Ford F-150 SCA-1E has impressive scale looks, with serious performance while off-roading. Check out the highlights below- * New retro livery * Pre-built and fully painted * One piece 313mm WB body * 2.1 spec comes standard * Chassis mounted servo * 1.9″ true beadlock wheels * Soft [...]
- 6/7/2022
- 11:47 am
- New Products
- By: Tim Mohr
Gens Ace Announces Advanced Series LiPo Smart Batteries
The good folks over at Gens Ace have just announced a new series of Advanced Series LiPo Smart Batteries. The new Advanced Series represents the very latest and greatest in LiPo battery technology for both safety and power output. Check out these highlights- * Expected to start shipping later this month * 4.35 volts maximum per cell, high output design * LED [...]
- 6/6/2022
- 8:41 pm
- New Products
- By: Tim Mohr
-
Team Corally 7075-T6 Aluminum Upgrade Differential Housing
Now shipping from Team Corally is a 7075-T6 Aluminum Upgrade Differential Housing. If you are into extreme bashing with your Team Corally 8th scaler, the new aluminum diff housing can go a long ways towards bomb proofing your rig. Check out these highlights- * Reduced heat build-up in the diff * Allows for precise inner bevel gear alignment * Includes an enhanced seal [...]
- 6/6/2022
- 3:49 pm
- New Products
- By: Tim Mohr
FTX RC 1/10 Kanyon Mountain Rescue Edition 2-Speed RTR
Just announced by FTX RC is the 1/10th scaled Kanyon Mountain Rescue Edition 2-Speed RTR. The Kanyon Mountain Rescue comes loaded with scale accessories to make your next off-road adventure the best one yet. Check out these highlights- * Switchable 2-speed gearbox w/ high & low speeds * Functional winch can be operated from the transmitter * Iconic Kanyon body w/ new Mountain [...]
- 6/6/2022
- 12:42 pm
- New Products
- By: Tim Mohr
Traxxas Drops New Upgrades For The Sledge Monster Truck
Over at Traxxas they have just announced a bunch of new Upgrades and Accessories for their mighty Sledge Monster Truck. Since its release, the Traxxas Sledge has been sending-it hard across the globe. The new genuine Traxxas upgrades and accessories can give your personal Sledge a quick facelift, or can be used to enhance performance and durability. * 6061-T6 aluminum [...]
- 6/3/2022
- 8:14 pm
- New Products
- By: Tim Mohr
RC4WD Poison Spyder RockBrawler II Rear Bumper W/ Tire Carri…
Shipping now from RC4WD is the very trick looking Poison Spyder RockBrawler II Rear Bumper W/ Tire Carrier. Designed to fit trucks like the Traxxas TRX-4 & RC4WD Blazer, the bumper is fully licensed and built to last. Here are the highlights- * Made from CNC machined billet aluminum * Tough black powder-coated finish * Fits 3mm LED lights * Weight – 7.16oz * Length [...]
- 6/3/2022
- 12:35 pm
- New Products
- By: Tim Mohr
2023 XRay GTX8 Nitro On-Road Kit
Coming later this year from XRay is the 2023 GTX8 Nitro On-Road Kit. This top-of-the-line race machine uses high-end build materials to go along with years of testing and engineering. Here are the highlights- * New graphite front top deck * Rear uprights have new graphite roll center plates * Reduced caster angle on front c-hubs * Machined graphite Ackermann plates * Shorter front and [...]
- 6/3/2022
- 11:40 am
- New Products
- By: Tim Mohr
RC4WD 1/10 Wood Garage Shelves and Work Bench Set
Shipping right now from RC4WD is a 1/10 Wood Garage Shelves and Work Bench Set. This scale set is the perfect addition to your scale rc garage and is made from real wood. Here are the highlights- * Made from quality plywood * Interlocking parts * No tools required for assembly * Shelf Size – 77 x 50 x 171mm * Work Bench Size – [...]
- 6/2/2022
- 6:19 pm
- New Products
- By: Tim Mohr
Tamiya Announces 1/10 McLaren Senna!
Just announced by Tamiya is the 1/10th scaled McLaren Senna. The new McLaren Senna is slated to come on Tamiya’s easy to build TT-02 chassis and of course will feature a highly scale detailed body. The picture above is from the Tamiya 1/24th scaled static model, but the 1/10th rc model should look equally as trick when it drops later [...]
ARRMA No. 38 Ford NASCAR Truck Limited Edition Body
New from ARRMA is a No. 38 Ford NASCAR Truck Limited Edition Body. Sized to fit cars like the 1/7 ARRMA Infraction, the new NASCAR truck body is big on scale realism, as well as attitude! * Fully licensed replica of the ARRMA sponsored Front Row Motorsports truck * Limited release, only 1,500 bodies will be made * Body comes silkscreened with a [...]
- 6/2/2022
- 9:33 am
- New Products
- By: Tim Mohr
Spektrum RC Is Looking For Firmware Testers
Over at Spektrum RC they have announced a Firmware Update Early Adopter and Beta Tester Program. That’s right, the crew at Spektrum are looking for a select group of testers to help them on their software updates. Members of the program will get early access to new features and updates, then you can give the Spektrum team feedback on their [...]
HPI Racing Announces New 2022 Vorza Truggy Line-up
That’s right folks, the crew at HPI Racing have announced 3 new Vorza Truggies to their growing line-up of RTRs. You can choose from an updated brushless Flux power Vorza, one with nitro power, or the new Vorza S that comes with numerous hop-ups. The classic Vorza is still one of our favorite bash rigs, but we can’t wait to [...]
- 6/1/2022
- 3:02 pm
- Featured Posts
New Products - By: Tim Mohr
Futaba HPS-CT701 Servo
New from Futaba is the HPS-CT701 Servo. This low-profile servo is a great option for 1/10th buggy, 1/10th on-road cars, or any install where space is at a premium. Check out these highlights- * Size – 40.5 × 21.0 × 26.2mm * Speed – 0.07sec/60° at 7.4 volts * Torque – 30.0kgf ・ cm at 7.4 volts * Weight – 53 grams * Supports Futaba’s [...]
Team Corally CS-5226 High Speed Servo
Over at Team Corally they are now shipping the CS-5226 High Speed Servo. The CS-5226 features titanium gears and a fast coreless motor. Here are more highlights- * Full CNC machined aluminum alloy case * Durable titanium gear set * Comes with bearings * Extremely fast coreless motor * Can be used with voltages ranging from 6 yo 8.4 volts * Water resistant * Size – 40.5 [...]
- 5/31/2022
- 6:16 pm
- New Products
- By: Tim Mohr
