FEATURED
You are browsing the archive.
ProMotion 2.2″ Talon Rear Buggy Tires
Recently announced by ProMotion are 2.2″ Talon Rear Buggy Tires. ProMotion is all about helping to put you in the winners circle and their Talon series tires can do just that. Here are the highlights- * Small pin design for grip on a variety of surfaces * Center pins are bridged in a 3×2 alternating pattern * Fast enough to get the TQ * [...]
RC4WD Spring Loaded Hinges for the Chevrolet Blazer & K10
Now shipping from RC4WD are Spring Loaded Hinges for the Chevrolet Blazer & K10. The good folks over at RC4WD are always pushing the envelope of scale realism and these spring loaded hinges can take your rig to a whole new level. Here are the highlights- * Made from high quality steel * Nickel plated finish * Weight – 14.4 grams * Allows for [...]
- 7/17/2025
- 1:47 pm
- New Products
- By: Tim Mohr
JConcepts Subcultures 2 Pre-mounted SCT Tires
New from JConcepts are Subcultures 2 Pre-mounted SCT Tires. The Subcultures are the first Short Course tire with three tier lug technology which allow the tires to have good grip on both soft, and hard, surfaces. Here are the highlights- * Three tier pin design with directional position * Lower grid, mesh of tread to support base traction * Low profile carcass with [...]
- 7/17/2025
- 1:05 pm
- New Products
- By: Tim Mohr
JConcepts Dirt Trac Pre-Mounted Oval Tires
Just announced by JConcepts are Dirt Trac Pre-Mounted Oval Tires. The new pre-mounted Dirt Trac tires are perfect for oval racing and are designed to fit trucks like the Traxxas Slash, Slash Modified, and Slash 4×4. Here are more highlights- * Specifically designed for dirt oval applications * Low-profile and wide track tread pattern * Closed cell foam inserts * Pre-mounted on Hazard wheels * [...]
- 7/16/2025
- 5:06 pm
- New Products
- By: Tim Mohr
Team Associated 1/10 RC10DR Dakar Edition RTR
New from the crew at Team Associated is the 1/10 RC10DR Dakar Edition RTR. This hot looking Dakar racer is based on AE’s championship winning 2wd SCT truck and is perfect for backyard bashing, or for long days at the park. Here are the highlights- * Durable and lightweight aluminum top shaft * Low center-of-gravity molded composite chassis * Hook-and-loop battery straps for [...]
- 7/16/2025
- 3:58 pm
- Featured Posts
New Products - By: Tim Mohr
Kyosho 1/10 Toyota Celica GT 1970 Tuned Ver. Fazer MK2 Ready…
Coming soon from Kyosho is the 1/10th scaled Toyota Celica GT 1970 Tuned Ver. Fazer MK2 Readyset. This vintage blast from the past has been beautifully scaled down from the 1:1 original and comes on Kyosho’s easy to drive Fazer Mk2 platform. Here are more highlights- * “Ultra Scale Body” replicates the fine body details * FZ02 shaft driven 4wd chassis * Factory [...]
- 7/16/2025
- 12:55 pm
- New Products
- By: Tim Mohr
FTX RC 1/10 Vantage 2.0 Brushless Buggy RTR
New from FTX RC is the 1/10th scaled Vantage 2.0 Brushless Buggy RTR. The original Vantage was released over 15 years ago and the new 2.0 model takes all the fun to a new level. Here are the highlights- * New longer chassis * Stylish split 6-spoke wheels * Modern, race inspired cab-forward body * 99% Ready-to-run * Etronix Photon KV2950 brushless motor * Voltz 2S [...]
- 7/16/2025
- 11:33 am
- New Products
- By: Tim Mohr
Traxxas Video – The Iconic 1979 K5 Blazer
The crew over at Traxxas have uploaded a new The Iconic 1979 K5 Blazer Video. The Traxxas TRX-4 K5 is loaded with scale realism, while also being incredibly capable while out on the trail. Watch the video below to see the iconic K5 doing some scenic rock climbing, while showing off that gorgeous K5 body. Use this link to get [...]
JConcepts 1/8 Buggy Injection Molded Front Wings
New from the JConcepts crew are 1/8 Buggy Injection Molded Front Wings. Injection molded for strength and durability, the new front wings from JConcepts can help improve cornering, while adding a cool new look to your buggy. Here are the highlights- * Available in black, grey, red, yellow, and white * Available for Tekno, AE, XRay, and Mugen * Exclusive JConcepts design * Injection [...]
- 7/14/2025
- 6:39 pm
- New Products
- By: Tim Mohr
Serpent 1/7 426 Outlaw RTR
New from Serpent is the mighty 1/7 426 Outlaw RTR. This absolute unit of an on-road car comes with massive power, to go along with its hot retro styling. Here are some highlights- * Born from Serpent’s racing heritage * Forged for asphalt warfare * Wide body styling * 4274 sized 6S brushless power * Flared fenders and massive rear wing * Realistic looking faux supercharger * [...]
- 7/14/2025
- 4:52 pm
- New Products
- By: Tim Mohr
HPI Racing 1/18 Venture18 U4 Ford Bronco 4400 RTR
New from HPI Racing is the 1/18th scaled Venture18 U4 Ford Bronco 4400 RTR. Available with licensed Vaughn Gittin Jr or Loren Healy livery, this hot looking small scaler can be driven nearly anywhere! Here are the highlights- * Built to dominate the trail * Bold looks with rock-solid performance * Based on the proven Venture18 platform * Full-scale capability in a portable, go-anywhere [...]
- 7/14/2025
- 2:35 pm
- New Products
- By: Tim Mohr
-
Hobby Plus 1/18 CR18P EVO 2 Convoy RTR
New over at Hobby Plus is the 1/18 Convoy EVO 2 RTR. This version 2 of the Convoy receives numerous updates to increase performance and durability. Check out these highlights- * Big-bore-threaded oil-filled shocks (oil not included) * Threaded shock collars * Servo on axle (SOA) set-up * Heavy duty driveshafts * Counter rotating rear driveshaft * 1.5mm stub axle pins and hexes * High visibility graphics [...]
- 7/11/2025
- 9:57 pm
- New Products
- By: Tim Mohr
JConcepts Announces Pioneer 1/8th Buggy Wheels
Now shipping from JConcepts are 1/8 Pioneer Buggy Wheels. Available in three different colors, and designed for maximum performance, JConcepts Pioneer wheels are quickly becoming the go-to wheels in rc racing. Here are the highlights- * JConcepts original design * Pop-out panel design with centered ribbing * Dimensional aspects mirror popular Mono wheels * Screw locations to replicate popular vintage wheels * Inner for [...]
- 7/11/2025
- 2:31 pm
- New Products
- By: Tim Mohr
New Teaser From HPI Racing
Over at HPI Racing they have released a new Teaser. The HPI crew is now teasing a new, fully licensed Ford ready to run, but that’s about all the information that has been given. HPI has long been known for making some of the best looking bodies in rc and we can’t wait to see what they have worked up [...]
Exotek Racing Announces NASCAR CVD Set
The crew at Exotek Racing have announced new NASCAR CVD Sets. These beefy CVDs are available for front (43mm) or rear (41mm). Here are the highlights- * Pro racing style CVD sets * Precise machining that reduces bearing binding * Hardened steel axles * 7075 hard anodized lightweight CVD bones * Lightweight alloy hexes for a smoother drivetrain The Exotek Racing NASCAR CVD Sets are street [...]
- 7/11/2025
- 11:00 am
- New Products
- By: Tim Mohr
