For Bashers, By Bashers!

You are browsing the "New Products" category archive.

Integy Alloy Case

Integy Alloy Gearbox Housing For The 2WD Stampede/Rustler/Ba…

Shipping now from Integy is an Alloy Gearbox Housing for the Traxxas 2wd Stampede, Bandit, and Rustler. The gearbox housing can give your rig a number of advantages, with perhaps the biggest being the ability to lower your motor temps. If your truck has the stock motor plate and transmission housing, the aluminum unit from Integy will help dissipate a [...]

Read More...

Spektrum DX5 Pro

Spektrum DX5 Pro

Looking for a killer new transmitter that doesn’t crush your bank account? If so, Spektrum has just announced the DX5 Pro. The new DX5 Pro comes with more ergonomic options than previous units. These allow you to tailor the fit of the radio to your hands and driving style. Combine the improved ergonomics with a plethora of advanced features, plus [...]

Read More...

Apex Bearing Set Traxxas Trx-4

Apex RC Products TRX-4 Rubber Shielded Bearing Kit

Now shipping from Apex RC Products is a complete Rubber Shielded Bearing Kit for the Traxxas TRX-4. The rubber shielded set is affordably priced, but features premium bearings. You can buy a set to have as spares for your rig, or after months of slogging around in the mud, your TRX-4 is probably overdue for a fresh set of bearings [...]

Read More...

Tamiya WWI British Tank Mk IV Male

Tamiya WWI British Tank Mk.IV Male

New from Tamiya is the radio controlled WWI British Tank Mk.IV Male. The tank comes in at 1/35th in scale with a length of just over 9 inches, making it easy to drive just about anywhere. Also, scale detailing is big at Tamiya, have a look at some of the close up pictures to see just how incredibly detailed the [...]

Read More...

RC4WD Angry Face Grill Plate

RC4WD Angry Face Grille Plate for the Tamiya CC-01 Jeep Wran…

Recently posted by RC4WD is a Angry Face Grille Plate for the Tamiya CC-01 Jeep Wrangler. The grille plate can be used to give your Wrangler a trick new look while not breaking the bank. * Made from stainless steel * Silver anodized finish * Width- 0.61″ * Length- 4.40″ Street pricing is set at just $15 and the grille plate has a part number [...]

Read More...

TheToyz RC Affordable Hex Driver Set

TheToyz 4pc Steel Hex Allen Driver Set

Have you been looking for an affordable set of hex drivers that will actually last? If so, have a look at the new 4pc Steel Hex Allen Driver Set from TheToyz. The four piece set comes with 1.5, 2.0, 2.5, and 3.0mm sizes, plus the handles are color coded to make identification a snap. * High speed steel tips * Ergonomic handles [...]

Read More...

Tamiya 57904 Team Hahn Expert Built

Expert Built Tamiya Team Hahn Racing Man TGS

Newly announced by Tamiya is an Expert Built version of their Team Hahn Racing Man TGS. The XB (expert built) version of the Team Hahn truck comes completely pre-built, pre-painted, and ready to bash! Here are some highlights- * Pre-painted, pre-cut, highly detailed polycarbonate body * 70mm radial tires * Uses TT-01 Type E chassis * 2.4Ghz radio system * Length- 438mm The XB Team Hahn [...]

Read More...

Blade RC Scimitar 215 Pro BNF Basic FPV Racer

Blade Scimitar 215 Pro BNF Basic FPV Racer

For all you aspiring factory pilots out there, Blade has announced the Scimitar 215 Pro 5″ BNF Basic. The Scimitar is designed for pilots who would rather race than build a chassis so it comes in a BNF form. Here are some of its highlights- * Comes professionally built and tuned * 2206-2450Kv naked-bottom motors * 20A ESCs with BLHeli-S and Dhot 600 [...]

Read More...

Axial 1967 Chevrolet C-10 Clear Body

Axial Racing 1967 Chevrolet C-10 Clear Body

New from Axial Racing is a 1967 Chevrolet C-10 Clear Body. The body has some incredible scale detailing and sports a truly vintage look. * Fully licensed * Raised hood, sunken bed and clean lines * Molded from .040″ polycarbonate * Clear and uncut * Fits 12.3″ wheelbase rock crawlers * Chrome grille and bumpers * Clear headlight and turn marker lenses * Detailed instructions * Large decal sheet Pricing [...]

Read More...

HB Racing RGT8-E

HB Racing RGT8-E On-Road Kit

Being teased right now by HB Racing is the RGT8-E. The RGT8-E is an 1/8th scale on-road kit designed for racing at even the highest levels of competition. The new car is based on HB’s successful RGT8 nitro car, but uses a number of changes to put down serious brushless power. More details are specifications will be released soon, until then [...]

Read More...

Traxxas Free Battery Charger TRX-4 Kit

Free Battery & Charger With New Traxxas TRX-4 Kit

Have you been looking for a new kit to start your next custom build? If so, the Traxxas TRX-4 Kit needs to be on your radar. The incredibly capable TRX-4 won our scale crawler shootout and now you can get a deal when buying a new one. Now through the end of the month you get a Free Traxxas LiPo Battery [...]

Read More...

Tamiya Expert Built Konghead 6x6

Tamiya Expert Built Konghead 6×6

Just announced by Tamiya is an Expert Built version of their world famous Konghead 6×6. The Expert Built version comes completely ready to bash being pre-built and loaded with electronics. The XB Konghead also comes with a battery and charger, leaving nothing else left to buy before bashing. * Pre-painted polycarbonate body * Durable G6-01 chassis is easy to build and drive * [...]

Read More...

JConcepts HB D817 Front Wing

JConcepts Front Scoop For The HB D817

New from JConcepts is a Front Scoop for the HB Racing D817 buggy. The new scoop can be used to give your 817 more control in rhythm sections and increased steering, as well as helping to keep your buggy planted in high speed sweepers. * Replaces the stock nose cone * Enhances steering * Comes with 2 scoops per package * Fits the HB [...]

Read More...

Team Associated MT12 Clear Body

New Clear MT28 Body From Team Associated

The folks over at Team Associated have announced a new Clear Body for their MT28 monster truck. The clear body allows you to put a custom paint scheme on your truck, a great way to make your MT28 uniquely yours. The body can also be used to replace a broken stock unit, or to simply give your MT28 an entirely [...]

Read More...

Kyosho Inferno MP9e EVO

Kyosho Inferno MP9e EVO

Just announced by Kyosho is the Inferno MP9e EVO. The EVO is a high-end race kit capable of winning at any level and sports a number of revisions over the previous edition. The EVO is still in the teasing stages as very few details have been released, but here are a few of the changes- * New chassis with more forward [...]

Read More...