For Bashers, By Bashers!

You are browsing the "New Products" category archive.

os 12xz

O.S. Engine – 12XZ Speed Spec III

New from O.S. Engines is the 12XZ Speed Spec III engine. The guys over at O.S. keep squeezing every little ounce of power out of these things! The outer head is 1mm shorter and sits 6mm lower over the crankcase for a lower center o gravity. The crankshaft has DLC coating and pressed-in Tungsten weights with a ceramic bearing. [...]

Read More...

RC4WD Officially Licensed Mickey Thompson iPhoneCase for iPh…

Want to have the sickest iPhone 5 case at your local bash spot? Sure you do! To claim that title you’ll need one of the new Officially Licensed Mickey Thompson iPhone cases from the crew over at RC4WD. The new case incorporates the famous Baja Claw design right into the case and is sure to turn heads, even on your [...]

Read More...

STRC Hop-up Parts for Traxxas Nitro 2wd Slash

Plan on adding a new Traxxas Nitro Slash to your rc garage this year? Lucky for you, ST Racing Concepts already has hop-up parts available and they have more on the way. Many of the parts from the electric Slash work on the Nitro version, hence the reason STRC has plenty of bling-bling goodness ready to go. Hit up THIS [...]

Read More...

onyx brushless

Onyx Brushless Systems

The folks from Duratrax have sent word for people looking to upgrade to brushless systems to consider making the jump to Onyx. Onyx Brushless Systems are available in 1/10th scale and 1/8 scale versions with several KV’s in each size. They even have 4 pole versions, and also a programming card that makes dialing in your system easy to do [...]

Read More...

Open Hobby Docking Power Supply for the Zenith Battery Charg…

The crew over at Open Hobby have shown a rendering of a DC power supply for their upcoming Zenith EX battery charger. The power supply is made to dock in an upright position right next to the Zenith, using a small footprint to leave plenty of space on your table to wrench on. Output for this switched mode power supply [...]

Read More...

Kyosho RB6 Hop-up Parts from ST Racing Concepts

The Kyosho RB6 buggy has really started taking off and STRC now has some of their uber hop-up parts for it. We’ve tested many different STRC hop-up parts and they all have proven to be very high quality. If you are looking to put the best on your Kyosho take a look at what STRC now has to offer for [...]

Read More...

New Factory Team Parts for the Team Associated B44.2 Buggy

The crew over at Team Associated have just announced some new Factory Team hop-up parts for their popular B44.2 electric off-road buggy. Some of the highlights of these new parts are- Part #9917- Graphite Hub Tower A. These new hub towers come in 2.5mm thick carbon fiber and give additional clearance for the Associated Factory Team 12mm big bore shocks. They [...]

Read More...

HPI CNC Aluminum Gearbox Plate 101267

HPI Aluminum Front Gearbox Plate for WR8 and Bullet Series

HPI has announced a new CNC machined aluminum front gearbox plate for their popular WR8 and Bullet series of vehicles. The CNC’ed piece not only adds some nice bling to your ride, but is stronger than the stock piece. Part number for the front gearbox plate is #101267, street price is $20, and they are available right now. Hit up the [...]

Read More...

Hong Nor X3 Sabre Electric Buggy

Hong Nor X3e Sabre Electric 8th Scale Buggy

There is nothing quite like the over-the-top power and speed of an electric 8th scale buggy. Hong Nor now has an electric version of their X3 Sabre 8th scale buggy. The X3e has been designed to take a beating and be quick around the track as well. Some of the features and specs include- * Lightweight diffs, front, rear and center * [...]

Read More...

Races Edge Switchback 2wd Brushless 2.4 GHz RTR Buggy

Racers Edge Switchback 2wd Brushless 2.4 GHz RTR Buggy

One of the latest entries into the “old school” buggy class is the new Racers Edge Switchback. The entry level Switchback 2wd electric buggy comes RTR, complete with a brushless power system and 2.4 GHz radio technology. Some of the other features and specs include- * Waterproof electronics system * Receiver box * 3600 kv brushless motor * 2.4 GHz radio system * Wizard ESC [...]

Read More...

Edam Zoom 8th scale buggy

Edam Zoom 8th Scale Electric Off-Road Buggy

Taiwanese car manufacture Edam has just released information on their new belt driven 8th scale electric off-road buggy called the Zoom. Going with belt drive is quite a departure from the traditional shaft drive, making the Zoom a radically different design than what is on the market right now. Some of the other features and specs include- * Adjustable wheelbase for [...]

Read More...

castle creations sidewinder 3

Castle Creations Sidewinder3 and Mamba Monster 2 Info

A while back we posted that Castle Creations would be upgrading their Sidewinder and Mamba Monster line to waterproof versions. Well the Sidewinder3 and Mamba Monster 2 have been officially detailed and are ready to go. We aren’t sure what took Castle so long for their in house product line to catch up to their OEM line, since that’s has [...]

Read More...

Ofna GT-V2e 8th scale on road electric car

Ofna GT-V2e Pro Electric 4wd 8th Scale On-Road Car

If you haven’t noticed yet, more and more companies are coming out with “XO-1” killers, 8th scale electric on-road cars built to take huge power and be stable at insanely high speeds. Ofna has a new big on-road car called the GT-V2e, built to take on all comers at your local bash spot. The GT-V2e comes as an 80% roller, [...]

Read More...

Hobao Hyper H2 Pro Buggy

Hobao Hyper H2 Pro 2wd Electric Buggy Kit

New from Hobao is their Hyper H2 Pro 2wd electric buggy kit. The old school 2wd buggy class is still popular at certain tracks and the new H2 should be a nice option for those looking for something different. Some of the features and specs include- * Rear or mid motor configurations * 3 or 4 gear tranny * CNC machined hard coated [...]

Read More...

TBR Bumper Wheelie Bar Duratrax VW Baja Bug

T-Bone Racing Rear Bumper and Wheelie Bar Set for Duratrax V…

All you bigtime Duratrax VW Baja Bug bashers should be interested to see the latest from the crew over at T-Bone Racing. TBR has just announced a new rear bumper/wheelie bar combo for your bug. This not only protects the rear of your chassis and motor, but also helps you hold longer wheelies for maximum bashing fun. Longer screws are supplied [...]

Read More...

Reviews