For Bashers, By Bashers!

You are browsing the "video" category archive.

3d rc video

First RC 3D Video!

Big Squid RC presents the first All 3D RC Video! 1000’s of people were treated to the premiere last week at iHobby 2011, and now it’s live on-line! You will need the red/blue glasses to see it properly in all it’s 3d glory though. It will be in other formats soon (so you can watch it on your 3D [...]

Read More...

Front Flip Back Flip with a HPI Flux

We have been able to do this with a Traxxas Stampede.. but didn’t think it would be so doable with such a large vehicle. Reader Daniel L. Sent in this video of him pulling off a front flip to back flip and landing it with his HPI Flux. That poor drive train.. lolNice jump Daniel! Keep up the sweet bashing!

Read More...

Quick Peoria Video

Bill posted up a cool little video of some of the stuff we were doing while in Peoria over the weekend testing stuff for the upcoming shootout. The video show’s us messing around with the Traxxas Stampede doing all sorts of flips and fails, with some sweet slow motion footage. Check it out!Nice job Wrench!

Read More...

Thunder Tiger Sparrowhawk DT12 Durability Video

If you haven’t read the Thunder Tiger DT12 Review yet you should really check it out. We just updated the review with a short video we did during our durability testing. In this one we jump the Sparrowhawk DT12 off the drivers stand roof at the Rivercity track in Peoria IL. After a tumble and roll landing, we drive it [...]

Read More...

Boost Drivers Stand Roof Jump Video

We just updated the Electrix Boost Review with the video below. This was during our durability testing, where we jumped it off the drivers stand roof twice! Both landings were pretty hard, but nothing broke, and we were driving immediately afterwards!It could take a good beating for sure.. make sure to read all about it in the review!

Read More...

Two New Hydroplaning Videos

Our buddy Craig “The Crazy Ramp Builder” just posted two awesome new hydroplaning videos! The first one seen here is of a Traxxas Summit cruising across a pond, and the second is a vehicle jumping a floating ramp on the pond! Great stuff!The second video is after the break.. click through…

Read More...

Back To Roots Bash Video

Wrench just posted a quick video from the back over on the FB page and the youtubes. If you were not there, here is a little of what you missed.

Read More...

RC Helicopter Fireworks Attack

One of the coolest RC videos I have seen in a while! Lots of cool fireworks and video footage! Well done guys!Wrench, we have a new project!

Read More...

Venom VMX 450 Dirt Bike Video

Recently we posted a REVIEW of the Venom VMX 450 1/4 scale dirt bike. We were really pleased with the bashing ability of this bike, as well as it’s ability to jump and go through snow! Here is a little video we put together of some of the bashing we were doing while working on our review.Hope you enjoy [...]

Read More...

Call of Duty – Black Ops RC-XD Video Review

Just added some video of the COD – Black Ops RC-XD vehicle in action with a mini review for your viewing pleasure. Please check out the video, and feel free to subscribe to our YouTube channel!Feel free to check out the written review in our RC Reviews section or just go directly to the COD Black Ops RC-XD Car [...]

Read More...

Testing out the live cam from our IHobby booth.

We’ll start going live with multiple cameras in the next couple days. Check out the show page for a chat room and all that jazz.

Read More...

DuraTrax Evader DT Week: Painting and Detailing – Part 2

Day 6 is the last build day of DuraTrax Evader DT Week. I’m finally getting around to doing my custom paint on my DT. The pre-trimmed, pre-drilled clear body from DuraTrax (Part DTXC6218) looks great and is easy to paint. There’s not much more to say about this one, I’m certainly no artist, but I like the [...]

Read More...

DuraTrax Evader DT Week: Painting and Detailing – Part 1

Day five of DuraTrax Evader DT week is the beginning of the end.  The last job I’m going to do on my DT is to put a custom paint job and other details onto it.  I’m using a new, clear body from DuraTrax (Part DTXC6218) and I’m reusing the hard plastic detail pieces from the current body.  This is going [...]

Read More...

DuraTrax Evader DT Week: Going Brushless and 2.4 GHz

Welcome to day four of DuraTrax Evader DT week here at the Squid.  Today I’m taking out the stock electronics and dropping in some mad power and control.  The stock Sprint 2 ESC, a fine system for beginners, gets the boot in favor of a Castle Creations Sidewinder ESC.  The Photon 2 brushed motor is taken out and put aside [...]

Read More...

DuraTrax Evader DT Week: Installing Ball Bearings and Alumin…

We’re on day three of DuraTrax Evader DT week.  Today I’m installing one of the best all around hop-ups you can get for your Evader DT, the full ball bearing set (part DTXC1096).  These ball bearings will not just make your ride more durable, they’ll also make it run faster and last longer on the battery.  Ball bearings are an [...]

Read More...

Reviews