For Bashers, By Bashers!

Unboxing Losi Micro Rally Car

This post is just all about the pictures since under the body it’s identical to the Losi Micro SCT. You can read all about it, and check out those pictures Here! More picks…

Read More...

RC Around The Web: Beware the interwebs… edition

Photo of the Week:Traxxas Slash by mstens.NERD!: Or too awesome for words: PC World – The RC Nerf Tank. It’s all a matter of perspective. Scammed: Don’t trust anybody you meet on the internet. This is why I never trade over the net and always get used stuff only through eBay with PayPal, there’s at least some buyer protection [...]

Read More...

DuraTrax Evader DT Week: Going Brushless and 2.4 GHz

Welcome to day four of DuraTrax Evader DT week here at the Squid.  Today I’m taking out the stock electronics and dropping in some mad power and control.  The stock Sprint 2 ESC, a fine system for beginners, gets the boot in favor of a Castle Creations Sidewinder ESC.  The Photon 2 brushed motor is taken out and put aside [...]

Read More...

Team Associated T6 Factory Team

Team Associated has a brand new ride.  The RC10TC6 Factory Team edition is an all new design that has been prepared for brushless power and LiPo batteries right out of the box.  The whole thing has been given a makeover but a few of the significant changes include moving the motor 13mm in toward the centerline of the chassis, lowering [...]

Read More...

Tips for Bashers: Cheap replacement outdrive springs

It’s well past time to add another entry to our Tips for Bashers section.  This time I’ll show you something that will save a bit of money and keep your ride running right. A lot of r/c cars and trucks that use dog bone style axles, instead of universals, have small springs in the differential outdrives to keep the dog bones [...]

Read More...

Official: Losi Mini SCT

We showed you the video a couple days ago and now Losi has put up the official stats on their web site.  I’m speaking, of course, about the new Mini SCT.  The 1/16 scale, 2wd, short course truck will feature a Xcelorin 4500kv brushless system with 2-3S auto LiPo cutoff, a complete Spektrum 2.4 GHz radio system, all metal gear [...]

Read More...

Traxxas TORC Series Event

This week Bill and I headed to the Traxxas TORC Series race. I’d like to take a moment and thank Peter Vieira and Damron Atkins from Traxxas for helping make this happen. They did an amazing job of helping us out and getting us hooked up with a little VIP action for the event! Hey Traxxas, you’re doing [...]

Read More...

DuraTrax Evader DT Week: Installing Ball Bearings and Alumin…

We’re on day three of DuraTrax Evader DT week.  Today I’m installing one of the best all around hop-ups you can get for your Evader DT, the full ball bearing set (part DTXC1096).  These ball bearings will not just make your ride more durable, they’ll also make it run faster and last longer on the battery.  Ball bearings are an [...]

Read More...

Traxxas NASCAR Camping World Truck ?

So we just got back from the Traxxas TORC series race. (report coming about that soon with pics) But there was some hubub about this Traxxas NASCAR Camping World Truck. Well, official word is that Traxxas is currently NOT planning on making this vehicle. It was a mock-up done to sort of show off and celebrate their crossover with Kyle [...]

Read More...

ASK Cub Reporter, Version 08.26.2010- A Weekly Q & A Session

Yup, it’s Thursday, hell ya, so here’s some of your questions…. ========== I was a little surprised when I compare the average voltage under load from the second shootout and compared them to the first shootout. In both cases you reported using the same discharger set to the same current. According to your results all but one of the batteries in the [...]

Read More...

DuraTrax Evader DT Week: Graphite Chassis and Aluminum Parts…

It’s the second day of DuraTrax Evader DT week.  Yesterday I installed some of DuraTrax’s high-end hard anodized shocks.  Today I tackle the blue anodized aluminum front bulk head (part DTXC6807), the blue anodized aluminum transmission brace (part DTXC9640), and the Evader graphite chassis (part DTXC6999). If you aren’t a fan of blue, all of the aluminum [...]

Read More...

Axial XR10 Carbon Fiber Parts

Even more love for the XR10 from Axial has some sweet carbon fiber hop-ups! These replace the stick aluminum XR10 components. You can buy them in a kit, or separately. The complete kit is 50% lighter than the stock parts! Check out Axial’s site for more info!

Read More...

Axial XR10 Aluminum C-Hubs

Looks like the XR10 from Axial is already getting some hop-up love! These new aluminum C-Hub’s look very tough! You can buy them as a upgrade kit or as separate parts. Check out Axial’s site for more info!

Read More...

HPI Baja 5B Bumper and Skid Plate from RPM!

We all know that RPM stuff rocks, but they mostly make stuff for the 1/10th and 1/8th scale market. Well check this out! RPM now has a HPI Racing Baja 5B Bumper and Skid Plate set! This is what the doctor has ordered! Those big cars hit hard, and to see something available from RPM means [...]

Read More...

Losi 1/16 scale Mini SCT RTR

The Losi YouTube channel is playing host to a video of a new 1/16 scale short course truck, dubbed the Mini SCT.  There isn’t much info provided but from what can be gathered from the video it’s going to be a ready-to-run package with a 4600kv brushless system, 2.4GHz Spektrum radio system, and it will sport a body dolled up [...]

Read More...

Reviews