You are browsing the "Avid Rc" tag archive.
New over at Avid Racing are 1/10 Truss Buggy Wheels. Avid has produced Truss series 8th scale wheels for several years, now all you 10th scale racers get a chance at them. Available in 2wd slim or full, 4wd front, and rear, there is a Truss racing wheel for all your 10th scale off-road classes. Here are the highlights- * Built [...]
New from Avid Racing is a Triad Direct Drive for the Team Associated B7 race buggy. Direct drive can be a good choice when racing lower powered stock classes and the Triad Direct Drive is an easy bolt-on upgrade. Here are the details- * Reduces rotating mass * Lightest direct drive unit available today * Only 6.45 grams with a 72 tooth spur * [...]
The crew at Avid Racing have announced Carbon Fiber Lowered Shock Towers for the Associated B7 and the Schumacher LD3. These lowered towers help reduce the center of gravity on your race buggy to increase corners speed. Here are the highlights – * Made from 4mm thick forged carbon fiber * Lightly chamfered edges to prevent splitting * Designed for high-bite carpet/turf tracks * [...]
Recently announced by Avid Racing is a Direct Drive Pro Kit for the Team Associated B7 race buggy. This slipper eliminator reduces rotating mass and is used to get the most out of your stock class motor while racing. Here are the highlights- * Lightest direct drive unit available today * 6.45 grams with a 72t spur (2.62g with no spur) * Includes [...]
New from Avid Racing are Triad Titanium Wing Screws. The Avid wing screws have been slightly revised and are now 2mm longer and come in black for an extra stylish look. Here are the highlights- * Updated to be 8mm long from the previous 6mm * Minimalist design approach * Low profile head is only 1.5mm thick * OD of the button is reduced [...]
Over at Avid RC they have announced 5.5 x 6mm -1mm Titanium Ball Studs. The negative 1mm ball studs can be used to fine tune handling by changing bump steer, Ackermann, and to adjust roll center/camber gain. Here are the highlights- * Ball is lowered 1mm from the standard AE kit heights * Machined from billet 6Al-4V titanium * Broached with a 2mm [...]
New from Avid Racing is a Ringer Titanium Turnbuckle Set for the speedy Tekno NB48 & EB48 2.2. These trick titanium turnbuckles not only look good, but were also designed for serious performance. Here are the highlights- * Avid’s first ever 8th scale turnbuckles * Shiny black finish with silver highlights * Trademark round Ringer design that reflects more light * Avid logo machined [...]
New over at Avid Racing is a Shock Rebuild Kit for 1/10 Associated buggies. The new Avid kit includes everything needed for a full shock rebuild, in just one package. Here are the highlights- * Includes a pair of 3×23 and 3×27.5 Avid chrome shock shafts * Includes Avid machined shock spacers * Includes Avid X-ring seals * Includes Avid Slop O-Ring Grease * Grease [...]
New from Avid RC is a Pre-Cut version of their 7″ High-Clearance/Low Drag Rear Wing. The new pre-cut version is available in standard or lightweight and can be installed on most modern 1/10 race buggies. Here are the highlights- * Designed for 1/10 buggies * High clearance wheel cutouts * Flat but curved front lip to increase airspeed over wing * Low pressure 18.5 [...]
Over at Avid they have announced a Titanium Slipper Screw for the mighty Team Associated B7 race buggy. This titanium slipper screw is much lighter than the stock part to help increase performance. Here are the highlights- * Thinned out in center for less rotating mass * 2mm hex head for easy install & removal * Made from billet 6Al-4V titanium * Nearly 50% [...]
Now shipping from Avid RC is a Chassis Protector for the new Associated B7 race buggy. The Avid chassis protector is a great way to keep your new B7 chassis from getting dinged up, while also giving the bottom of your chassis a whole new look. Here are the highlights- * Fits – Associated RC10B7 * Manufactured in collaboration with Stickit1Racing * Includes [...]
New from Avid RC are Ringer Titanium Turnbuckles for the speedy Team Associated B7 Race Buggy. The new turnbuckles from Avid have directional A-Arrow’s machined into the center for an extra trick look and are extra thick to prevent breakage or bending during a crash. Here are more highlights- * Shiny black finish with silver highlights * Avid’s infamous replacement guarantee if [...]
New from Avid RC are Front & Rear Shock Part Boxes. These handy dandy part boxes look good and are great for saving space in your pit box. The shock part boxes make it easy to store all the extra shocks parts that you need, while also helping to up your organization game. The Avid Shock Part Boxes are street priced [...]
New from Avid RC are some very cool Aluminum Steering Bellcranks for the Associated DR10 drag car. The aluminum bellcranks are much stronger than stock and can also help give your car maximum steering feel. Here are the highlights- * Machined from 7075-T6 high grade aluminum * Anodized in black * Highlighted edges * Includes 1 left & 1 right bellcrank w/ 2 aluminum [...]
New over at Avid Racing is a Chassis Brace Support Tuning Set for the TLR 22X-4 race buggy. The Avid chassis brace set can make your buggy more predictable, which can allow you to drive harder by giving you more confidence out on the track. Check out these highlights- * Stiffens front end of buggy * Thick 3.5mm thick front brace * [...]
