For Bashers, By Bashers!

You are browsing the "axles" tag archive.

RC4WD Blackwell X1 Front Scale Axle

RC4WD Re-Releases Blackwell X1 Scale Axles

Back for a limited time only are Blackwell X1 Scale Axles from RC4WD. These beefy units are big on scale realism, while being more than sturdy enough for hardcore crawling. Check out these highlights- * Designed to fit 1/10 scale rock crawlers * Standard 12mm wheel hexes * Housings are CNC machined from aircraft grade aluminum * 5mm axle input shaft * Full bearing set * [...]

Read More...

Team Associated RC10T6.1 FT Titanium Front Axles

Team Associated RC10T6.1 FT Titanium Front Axles

Just announced by the crew at Team Associated are incredibly trick Titanium Front Axles for their RC10T6.1 stadium truck. The titanium axles are extremely lightweight, yet have serious durability. Check out these highlights- * Fits- RC10T6.1, RC10T6.2, RC10SC6.1, RC10SC6.2 * Weight- 3.2 grams per axle * Saves a total of 4.8 grams over stock axles * Trick Factory Team look The Team Associated Factory [...]

Read More...

Exotek Aluminum Upgrades TLR 22S 22 5.0 Wheel Hex

Exotek Announces Upgrades for the TLR 22S/22 5.0

New from Exotek are a pair of Upgrades for the TLR 22S/22 5.0. First up are Titanium Wide Front Axles, with the second item being Aluminum Rear Drag Hexes. The titanium front axles add about 5mm per side to the width, while the rear hexes come in at 8mm in width. Both items were designed to be durable enough for [...]

Read More...

Axial Racing Standard Axle Conversion Kit SCX10 III

Axial Racing Standard Axle Conversion Kit for the SCX10 III

New over at Axial Racing is a Standard Axle Conversion Kit for the SCX10 III scale crawler. With some builders wanting the more scale appearance of a normal straight axle, the conversion kit makes it easy to make the switch. Here are the highlights- * Includes everything required for a straight axle conversion * Works on SCX10 III trucks with 12″, 12.3″, [...]

Read More...

JConcepts Aluminum Front Axles RC10

JConcepts Aluminum Front Axles for RC10/RC10B2/RC10B3

New over at JConcepts are Aluminum Front Axles for the Team Associated RC10, RC10B2, as well as the RC10B3 race buggies. The new axles from JConcepts are made from a durable 7075 aluminum and have been anodized in black for a trick look. The original geometry has been maintained with the new axles and they are a perfect drop-on fit [...]

Read More...

Redcat Racing XR247 Axle Kit

Redcat Racing XR247 Axle Kit

Over at Redcat Racing they have announced a new XR247 Axle Kit. The XR247 axles come pre-assembled to save you time and were designed to tackle the rigors of hardcore crawling. * Heavy-duty double-sheer mounting points * Integrated trusses * Steel internal axle tube inserts * Diamond shaped pumpkins * CNC machined aluminum spools * One piece pinion gear with 2.91:1 gear ratio The Redcat Racing XR247 [...]

Read More...

Exotek Titanium CVA Axles TLR 22 Drag Race

Drag Racing Only – Exotek Titanium CVA Axles for the TLR 22

New from the Exotek Racing crew are Titanium CVA Axles for the TLR 22 1/10 race buggy. These axles were specifically designed for maximum speed and are recommended only for drag racing. Here are the highlights- * Over 40% lighter than stock units * Weight- 3.7 grams each * Made from genuine titanium * Fits most TLR 22 buggies * Reduces rotating mass for quicker [...]

Read More...

Vanquish Products Currie F9 Front Axle Axial Capra

Vanquish Products Currie F9 Front Axle For Axial Capra

Over at Vanquish Products they have announced a new Currie F9 Front Axle for the Axial Racing Capra. The new fully licensed Currie axle features an offset pumpkin and a slight increase in camber. Here are more details- * CNC machined aluminum construction * One-piece machined bearing retainers * Over 50 degrees of steering * Extra mounting holes on rear of truss * Bent stainless [...]

Read More...

RC4WD Rigid Remote Lock Rear Axle

RC4WD Rigid Remote Locking Axles

Have you been looking for a high-end set of remote locking axles for your next scale build? If so, the good folks over at RC4WD have something new for you. RC4WD has announced Rigid Remote Locking Axles for 1/10-1/8 scale off-road trucks. Have a look at these features- * Front and rear remote locking axles available * CNC machined aluminum housing * Axle [...]

Read More...

Carisma RC Carisma SCA-1E Aluminum Axles

Carisma SCA-1E Aluminum Scale Rock Crawling Axles

Just announced by Carisma are new CNC Machined Aluminum Axles for the SCA-1E scale crawler. Not only do Carisma’s new axles look amazing, but they are also great for adding a significant amount of weight down low on your chassis to improve handling. Here are more highlights- * Made from CNC machined aerospace grade aluminum * Comes with natural aluminum finish, can [...]

Read More...

MST Scale Crawling MPA Portal Axle Set

MST Scale Crawling MPA Portal Axle Set

New from MST (Max Speed Technology) is the MPA Portal Axle Set. Portal style axles are all the rage right now, and for good reason, their extra ground clearance can come in quite handy while rock crawling. * 14mm increase in ground clearance * Upgraded and reinforced CVD axle * Full bearing set * Can be used on front or rear * All metal gears * [...]

Read More...

Deadloc Racing Scout Portal Axles V2

Deadloc Racing Scout Portal Axles V2.0

New from the hard working crew over at Deadloc Racing is the Version 2.0 of their Scout Portal Axles. The V2.0 Scout portals are gnarlier than ever, here are the highlights- * Designed to fit the Axial SCX10 & SCX10 II * CNC machined from 6061 billet alumnium * Same width as stock SCX10 II axles * Fully loaded * Heavy duty gears * Heavy duty [...]

Read More...

Redcat Racing RC Portal Rock Crawling Axles

Redcat Racing Portal Axle Kit

Here ya go Redcat Racing fans, they have just announced an all new Portal Axle Kit. The portal axles were designed for trucks like the Redcat Gen7, but can also be used on a wide variety of other scale rock crawlers. Here are the highlights- * Increases ground clearance * Comes with everything needed for a direct Gen7 Sport or Gen7 Pro [...]

Read More...

SSD RC Pro44 Portal Rear Axle SCX10 II

SSD RC Pro44 Portal Rear Axle For The SCX10 II

Recently announced by SSD is a Pro44 Portal Rear Axle for the SCX10 II. The portals feature a great scale look, but more importantly, they can give your rig more ground clearance while out on the trail. * Increases ground clearance by 12mm * Nylon main housing * Uses stock mounting locations * Removable differential cover * Works with stock gears & bearings * CNC machined [...]

Read More...

SSD HD D60 Centered Rear Axle Aluminum Upper Mount

SSD HD D60 Centered Rear Axle Aluminum Upper Mount

Shipping now from SSD is a heavy duty aluminum D60 Rear Axle Upper Mount. The mount was not only designed to be a great scale upgrade, but also to be beefy enough to withstand the worst you can throw at it while out on the trail. * Made from CNC machined aluminum * Black anodized finish * Same link mounts as the AR60 [...]

Read More...

Reviews