You are browsing the "brushless" tag archive.
If you run a dual battery 1/10th scale truck, then Novak’s new Diablo Brushless system is just the boost your rig needs. The Diablo 550 Sensored Motor provides a good fun to bash time ratio, and should also haul combined with the witchcraft intelligent electronics inside the ESC. With all this power comes huge amp loads, but Novak’s got you covered with something called “Launch-Limit” – [...]
Traxxas has something new coming out on the 30th of November 2011! And that’s it really… We don’t know any more! There have been guesses that it could be a 1/5th scale or a 1/8th scale buggy, but nobody is 100% sure. At the rumor price close to $1000 it’s not going to be a 1/16th scale! Personally we are [...]
Turnigy has released a new 2WD Desert Racing Buggy. This brushless buggy is pre-built, but requires a radio and battery to be fully ready to run. You get plenty of power from a 35A esc with a fan and a 3300kv 540 motor, undoubtedly a bulletproof EZ-Run based system. You’ll also find steel driveshafts, adjustable camber and toe, as well [...]
Racers Edge have just released their first RC truck – the Pro2 Short Course Truck. They aren’t getting much attention at the moment, but they deserve a whole lot more, because what you’re seeing right here is a 2.4ghz equipped 1/10 brushless short course truck for under $190….. 😀 Although it fails to meet up to some of the spec of “pro” level kits, it looks to be more [...]
Kyosho have revised their DBX VE 1/8 Buggy to keep up with current styles. In the DBX VE 2.0 you will find an Orion Vortex 10 motor and an all new 3s Li-Po capable RV10 EVO ESC, a slick new FHSS 2.4GHZ radio, and durable bash-proof parts such as big bore shocks and an aluminum motor mount. To top it all off, you get [...]
Reedy has a couple new 540-SL and 550-SL Sensorless Brushless Motors to give your 1/10 scale car or truck a little more get-up-and-go! The 540-SL has a 2-pole rotor and 1/8″ steel shaft, while the 550-SL has a 4-pole rotor and 5mm shaft. All are sensorless, with triple-insulated windings and 3.5mm bullet style connectors. The 540-SL is [...]
This just arrived on my doorstep, courtesy of the fine folks in the big, brown trucks. It’s Redcat Racing‘s latest vehicle, a Monsoon XTE, 1/8 scale brushless truggy. I thought I’d share some photos and info with all of you. Inside the box you’ll find the big Monsoon XTE, nearly 100% assembled. You just need to put the wheels on and [...]
What do you guys do with the models you review? do you sell them, keep them, givve them away? If you give them away then sign me up! I would always be interested in a new rc! Really love the site and keep on bashin’ ! Gray M. Cubby- Hey thanks for the props Gray. We don’t “sell” used test vehicles as much [...]
Futaba have released three new High Voltage servos, of which two should be of interest to the car and truck guys. The new S9352HV and S9353HV servos both have the same s/0.06 speed and humungous 306 oz/in torque, but the difference is the S9353HV boasts a full metal case for extra durability. The BLS256HV servo is intended for helicopter rudder use, as it significantly lighter [...]
It looks like the HPI Mini Trophy Truck has offically gotten the Flux treatment! You now get all the killer scale features of the Mini Trophy Truck, combined with a Flux Vektor 4800KV motor and a Flux Vapor ESC, ready for some 3S action. Speaking of 3S, HPI now advertises the MTT as running 42MPH on a 3S. [...]
This cool little device from Castle Creations called the “CapPack” is designed for use in high powered electric vehicles, where batteries may suffer from voltage drop under severe load – this capacitor bank will give you that bit of extra go under accelleration. At $24.95, it costs a whole lot less than a new battery pack!Head over to the Castle Website for full details.
Team Associated have now released an electric version of their RC8.2 FT kit – the RC8.2E Factory Team. It includes a ton of shiny aluminum bling, including Big Bore hard-anodized threaded shocks with Ti-Ni coated shafts, 7075 driveshafts, 7075 steering knuckles, suspension mounts and a cool sliding motor mount for easy adjustment. To top it all off, a slick JConcepts Punisher [...]
Want more speed and lower operating temperatures from your 540 Ballistic motor? Novak’s got you covered with this Vented Endbell kit, which includes both the front and rear endbells as well as oversised bearings.You can get your hands on a kit in November, so keep an eye on the Novak Website for details
Even more Redcat stuff to show you guys. This is their new brushless 1/8 scale line, the Hurricane, Monsoon and Avalanche. All three are fully RTR with 2.4 GHz and dual 2S LiPo batteries included. These things look to be pretty beefy, with lots of thick metal braces. Look for them to be hitting very soon [...]
Vampire Racing have announced that their SR1 and SR1 Plus esc’s which were first shown at the Nuremberg toy fair are now available for purchase. The ESC can handle motors down to 3.5t and either 1s or 2s lipo packs. They are equipped with something called “Power Timing System”. All you need to know about it is that it means you [...]
