For Bashers, By Bashers!

You are browsing the "metal gears" tag archive.

Hitec D-Series Servos

New D-Series Servos From Hitec

Just announced by Hitec are Five New Servos in their popular D-Series line-up. New are the D89MW, D145SW, D485HW, D646WP and D777MG, all of which feature 32 bit resolution and incredible digital performance. For all you bashers out there, the 5646 has been replaced by the IP-67 rated D646WP. The D145SW is made for slim applications in aircraft. The new low [...]

Read More...

Team Orion Servos

2 New Servos From Team Orion

To help you get the most out of your car, Team Orion has announced a pair of new servos. The new servos are the Vortex VDS2-HV 2607 and the VDS2-HV 1605. With waterproofing standard, along with high voltage capability and aluminum cases, these should work well in a wide variety of applications. * Full metal gears * Smooth coreless motor * Programmable * High [...]

Read More...

Hitec D-Series Servos

2 New D-Series Premium Servos From Hitec

Just announced by Hitec are a pair of new D-Series servos, the sport class D625MW and D645MW. These replace the older HS-5625MG/HS-5665MH and are designed to give you solid performance at a great price point. Here are some of their specifications. * Splash proof design * 25 tooth splines * Fully programmable * Can be used on a variety of different input voltages (4.8 [...]

Read More...

Hitec D954SW Servo

3 New Servos From Hitec

It is no secret that Hitec is known as the leader in servo technology. To help give you more high-end servo options for your rigs, they just announced 3 New Servos designed for durability, ease of programming, and smooth response. First up is the D930SW. The D930SW uses steel gears and is aimed at the high speed market. It sports a [...]

Read More...

SSD Axle Gear Set SCX10 II

SSD Axle Gear Set For The SCX10 II

To help bomb proof your SCX10 II, SSD RC has announced a new Axle Gear Set. The gears have been CNC machined out of hardened steel, helping to give your truck increased durability. The gears are 8 tooth and 30 tooth, which retains the stock gear ratio, and are a direct fit in the stock AR44 axle. The part number for [...]

Read More...

SSD HD Steel Tranny Gears Axial

SSD HD Steel Transmission Gear Set For The SMT10/SCX10/Wrait…

Bomb proof that Axial rig of yours with a Heavy Duty Steel Transmission Gear Set from SSD RC. The hardened steel gears are designed to take the worst you can throw at them and the 28 tooth idler has been upgraded to 11mm bearings to take even more abuse. The SSD gear set is a direct fit for the SMT10, [...]

Read More...

Axial polycarbonate hardtop for Jeep Wrangler

Axial Polycarbonate Hardtop and Complete Metal Gear Set

The guys over at Axial have announced two new products for all you scale fanatics. First up is a polycarbonate hardtop for the Axial 2012 Jeep Wrangler Unlimited Rubicon body. The hardtop is made out of thick .040″ polycarbonate and uses four screws to hold it in place. The hardtop is officially licensed by Jeep and comes with all the mounting [...]

Read More...

Axial XR10 machined gears and titanium gear shafts

Axial‘s flagship crawler, the XR10, is a tough truck.  But even the toughest trucks can be improved, and Axial is aware of that.  There’s now a bunch of new options to further bullet-proof your ride.  Axial promises that their new lightweight, CNC machined gears will not only be more durable, but also more efficient, the complete set will reduce the [...]

Read More...