You are browsing the "micro" tag archive.
Over at Hard Park Crawlers they have announced the 1/24th scaled Mercury Rock Crawler Kit. If you’ve been looking the best of the best in micro sized crawling, the HPC Mercury has to be at the top of the list. Look at these highlights- * Laser etched, numbered chassis milled from 7075 aluminum * Carbon fiber panels to conceal electronics * Carbon fiber [...]
The crew over at FairRC has released full details on their FCX24 Woodlander Yellow Rusted Mod RTR. This micro sized crawler has serious levels of patina and even uses real wood in the bed. Here are the highlights- * Hand painted in faded yellow with patina * Authentic Unimog polystyrene body * Nylon chassis * Remote controlled light system * Two speed transmission * High clearance [...]
Over at Carisma they have uploaded a new video called When Toyota AE86 H2 Concept Goes Drifting. The 1/24th scaled Carisma Toyota AE86 H2 Concept car can be drifted nearly anywhere and the video below shows just how much fun you can have in a small area. The new Carisma comes with serious brushless power and dedicated drift wheels to [...]
There are some new mods along with a whole new website from Vast RCX! If you are looking to hop up your Micro T or Micro B, this is where you want to start since they have enough parts to essentially re-build the entire vehicles! All designed and built here in the USA. Go check them out, and make sure [...]
Over at HackFab they have announced a 1/24 Micro Late Model Body. This body is a re-release from an original BRP mold (#811) and is an easy way to get your micro scaler ready for oval racing. Here are the highlights- * Formed from tough .030 Lexan * Originally released in the mid 2010’s * Length: 8″ * Width: 4.125″ * Height: 1.75″ * Wheelbase: 4″ * [...]
Holy smokes! The 1/28 chassis kit wars are in full effect right now! In the last week we’ve posted 3 high-end 1/28th scalers, thus showing how hot that class is right now. To join in the fun, Reflex Racing has announced a Generation 3 of their 1/28 RX28SE On-Road Kit. The Gen 3 upgrades help improve handling, as well as [...]
Just how hardcore are you at micro racing? If you only race the best of the best, then take a look at the Xbility One RWD on-road kit. The One is a high-end 28th scaled racer that is made for all out speed around the racetrack. Here are some highlights- * New front-end with 1/8 inspired steering knuckles * Easy to adjust [...]
Over at Atomic RC they are releasing details on their upcoming 1/28th scaled MRV V-Link RWD Chassis Kit. This micro sized racer is designed for high-end performance on high bite tracks. Check out these highlights- * V-Link pivot system lowers chassis roll center * Easy to drive with lots of rear grip * 3 position quick change roll center * 7075 aluminum chassis * Front [...]
New from Serpent is the 1/24th scaled Mini Spyder SC RTR. This micro sized short course truck has realistic styling and can be driven nearly anywhere. Here are the highlights- * Rear wheel drive chassis * 2.4GHz remote control * Fully proportional control * Maximum speed can be limited via the remote * Removable battery * 8520 Coreless motor * 3.7V 300mAh LiPo Battery * Build in Electronic [...]
For all you micro racers out there, Reflex Racing has announced the 1/28 FX28 F1 Car. The FX28 is a high-end 28th scale racer designed for serious on-track performance. Here are the highlights- * New design from the ground up * Made with the highest quality materials, coatings, and finishes * Simple, easy to work on design * Super tough 2 piece front end * [...]
Over at Radbody they are teasing a new 1/28 FX28 F1 Clear Body. The FX28 is sized to fit 1/28th scaled F1 cars and is expected to ship with drivers helmet and protection halo. Small scale just keeps getting more popular, with part of the reason being so many affordable hop-ups from the aftermarket. We’ll have to wait a bit [...]
Recently announced by Kyosho is the 1/28th scaled First Mini-Z Speed Racer GoGoGo. No matter if you are a Speed Racer fan or not, this easy to drive Mini-Z is a great first rc car for nearly anyone. Here are the highlights- * Perfect for beginners and pros alike * Shock-absorbing suspension * High-grip rubber tires * Pre-assembled display-quality body * Real Drive Mechanism offers [...]
Now shipping from Powerhobby is an Aluminum Front Shock Tower for the Micro-B. This beefy front shock tower is made from aluminum not only for durability, but also for a trick look. Made as a direct bolt-on upgrade, the Powerhobby aluminum shock tower has been tastefully anodized in black with the edges left shiny to truly stand out in a [...]
Now shipping from Carisma is a GT24 Maintenance Parts Box. The maintenance parts box comes with the most common spare parts that you will need while running your GT24, thus making for easy repairs and rebuilds when needed. The Big Squid crew wishes more companies would put out something like this for their new releases. Check out these highlights- * [...]
New from Atomic RC is the 1/28th scaled MRX Master Edition Pan Car Kit. If you are looking for serious speed in a micro sized car, the MRX Master Edition can definitely do that. From racing on indoor carpet tracks, to doing speed runs in an empty parking lot, the MRX Master Edition is designed for serious speed. Here are [...]
