You are browsing the "motor" tag archive.
Just announced by Reedy is an all new line-up of Sonic SP5 Competition Stock Motors. The new SP5s feature a unique design for all-out stock class performance. Here are the highlights- * CNC-machined housing with optimized air cooling * Custom high-power stator design * Low-resistance solder tabs and collector ring * Balanced rotor with high-strength magnet * Dual precision ball bearings * Aluminum end cap with [...]
New from Castle Creations is a 1721-1260Kv Sensored Brushless Motor. This absolute unit of a brushless motor is sized to fit large scale trucks like the ARRMA 8S Kraton and was designed for insane levels of power, while also being highly efficient. Here are the highlights- * Exceptional speed, torque, and acceleration * Water resistant design * Ideal for 1/7th scale vehicles weighing [...]
New from Hobbywing is the Tunalyzer Brushless Motor Tester. This next generation tool is used for motor testing and tuning and can be used on both sensored, and non-sensored brushless motors. * Consistent and reliable test results * Accurate test modes * Stiffly regulated voltage * Manual test mode * Multi-function control dial * RPM is displayed in real time * 3″ touch color display * OTA [...]
Recently announced over at Castle Creations are a pair of new 14XX sized brushless motors. The new motors are the 1412-2100kV and the 1412-3200kV and both were designed for massive power, as well as high efficiency. Here are the highlights- * 4S LiPO maximum cell count * Can be used sensored or sensorless * Ultra efficient design * 36mm diameter * 62.5mm long * Ideal for [...]
For all you no-prep drag racing fanatics out there, Maclan Racing has announced the DRK 4-Pole 6600kV Brushless Motor. Designed for insane levels of raw power, the new DRK 6600 is more than ready to help you break records down at your local drag strip. Here are the highlights- * Proprietary DRK 4-Pole Unlock firmware * Extremely high power and with smooth [...]
New from Reedy is a line-up of Sonic 540.DR Competition Brushless Drag Racing Motors. The Sonic 540.DR has ample torque off the line, with big power up top. Here are more highlights- * New stator with updated profile and thicker laminations * Balanced, high-strength 13.5mm rotor * Precision ball bearings * Several versions are available to suit various tuning requirements * Not legal for ROAR, [...]
New from Powerhobby is a 050 High Torque Motor for the Axial Racing SCX24. This high-output motor from Powerhobby comes with a tuned rotor and is longer than the stock unit for added torque. If you are looking to bolt some affordable power into your SCX24, this is the motor for you. Here are the highlights- * Comes with spare 11 [...]
New from Maclan Racing is the gnarly 3 Turn MRR DRK Drag Race King Brushless Motor. This 3 turn beast was designed for insane wattage output to help you crush your competition. Check out these highlights- * Based off of Maclan’s successful V2 platform * Pure drag race motor designed for mod racing * Designed and developed here in the USA * 100% hand [...]
New from Hobbywing is the XeRun AXE540 R2 2300kV sensored brushless motor. The new Axe 540 is sized to fit nearly any 1/10th scaler and is sensor based for the ultimate in precision. Here are more highlights- * Based off of HW’s original 550/540L motors * Shorter in length than their 540L * Max Cell Count – 3S LiPo * Weight – 185 grams * [...]
Over at Castle Creations they have just announced their first ever drag race/speed-run brushless motor! The beastly 1721-2400kV can put out enormous amounts of power, which is just perfect for drag racing, speed runs, or competition long jumping. Check out these highlights- * Ideal for running up to 8s LiPo in 1/8 & 1/7 scaled vehicles * Stainless-steel rotor sleeve for reinforcement [...]
Over at RUDDOG they have recently dropped 3 new Brushed 550 Motors for rock crawling. All three motors feature a low RPM 5-slot design and will be available in 14, 16, and 20 turn models. * 550 sized for increased torque * Dual bearings for less friction * Fully adjustable timing * Plated end bells * Replaceable motor brushes and springs * Brush heatsink towers * Fully [...]
After dropping some new rebuildable brushed motors earlier this morning, Spektrum has now announced a pair of Firma 2-in-1 Brushless Crawler Motor/ESCs. These combo units are great for saving space, while also giving you serious brushless performance. Check out the highlights below- * Engineered to be used with 1/10th scale rock crawlers * Advanced field-orientated control (FOC) * Professional drag brake performance and [...]
New from Spektrum is a line-up of 5 new Firma Rebuildable Brushed Crawling Motors. The new crawling motors from Spektrum are available in winds from 16 turns, all the way up to 80 turns. Here are the highlights- * Low cost upgrade * Fully rebuildable design * Impressive torque and speed * Available winds- 16T, 20T, 35T, 55T, and 80T * 5-pole design on 16 [...]
Here is a tool that every hardcore basher needs in his toolbox, a Universal Motor Bearing Replacement Tool from Fantom Racing. This tool can be used to make a hard chore, quite easy. Check out these highlights- * Works with all brands of 540 size motors w/ .375″ O.D. bearings * Handle made from CNC machined aluminum * Stainless steel threaded rod * Fine [...]
Just announced by Reedy is a line-up of Radon 2 Crawler 550 Brushed Motors. The Reedy Crawler 550 motors are big on stump yanking torque, but don’t make a big dent to your wallet. Check out these highlights- * Longer armature and magnets give more torque than a standard 540 design * Ideal for heavier rigs or steep terrain * 5-slot design makes [...]
