You are browsing the "rc10b7" tag archive.
Recently announced by Team Associated is a 67mm Universal Driveshaft Set for their RC10B7 race buggy kit. These can come in handy for set-ups where the stock 69mm driveshafts end up being a bit too long. Here’s the highlights- * Works well with -4mm hubs and 81mm arms set-ups * Gives the option to try a universal driveshaft set-up * Fits – RC10B7, [...]
Over at Team Associated they have announced 5 New Factory Team Upgrades for their 1/10th scaled race buggies. The Factory Team upgrades are the same ones used by their factory drivers and are designed to fit perfectly, as well as to improve performance and durability. RC10B7 FT Aluminum Differential Height Inserts, Notched #92567 $33 RC10B84 FT 39/17 Ring And Pinion Overdrive Gear Set, Steel #92568 $45 RC10B84 [...]
New from Team Associated are FT Rear Hubs for off-road racing platforms. These high-end Factory Team rear hubs offer a new -4 offset and are extra beefy to eliminate DNFs. These are available in black or blue and in standard or HRC geometry. You can use this link to get full details on the Team Associated FT Rear Hubs, or you [...]
New over at Willspeed is the insanely trick B7 Fast Fox Conversion Kit. The Fast Fox conversion kit takes your Associated B7 from mild to wild, giving it a complete cantilever make-over. Check out these highlights- * Cantilever suspension system for the Associated RC10B7 * Lower center of gravity than the stock B7 * Centralized mass center for improved handling * Increases aerodynamic efficiency * [...]
Now shipping from JConcepts is the P2X RC10B7 Worlds Body. The P2X was engineered for additional rear downforce to help keep the rear of your buggy planted in corners. Here are the highlights- * Original design by JConcepts * Available in standard and lightweight thickness * Tight profile, follows chassis perimeter * Slim nose, fits over top deck and under shock tower * Front deflection [...]
Newly announced by Team Associated is a 3-Gear Gearbox Conversion for the RC10B7 race buggy kit. Going to a 3 gear transmission can help lower lap times on high bite indoor tracks and the new gearbox conversion from Associated makes it easy to convert your B7. Here are more highlights- * Durable and efficient 3-gear tranny * Fits – RC10T7 Team kit * [...]
Now shipping from JConcepts is a Purple Fin Titanium Turnbuckle Set for the Associated RC10B7 race buggy. These trick looking turnbuckles are anodized in purple to help your buggy stand out in a crowd. Here are the highlights- * Designed specifically for style, durability, and performance * Original design by JConcepts * “Fin” styling * Made from high-grade, machined titanium * Heavy-duty 3.5mm thread base * [...]
New from Avid Racing is a Triad Direct Drive for the Team Associated B7 race buggy. Direct drive can be a good choice when racing lower powered stock classes and the Triad Direct Drive is an easy bolt-on upgrade. Here are the details- * Reduces rotating mass * Lightest direct drive unit available today * Only 6.45 grams with a 72 tooth spur * [...]
New from 1up Racing are Carbon Fiber -2mm Shock Towers for the all conquering Associated B7 race buggy kit. These high-end carbon fiber shock towers are shortened by 2mm in height to help reduce the center of gravity of your buggy when racing on high-bite tracks. Check out these highlights- * Precision-engineered and manufactured * Gives you an edge on high-grip tracks * [...]
The crew at Avid Racing have announced Carbon Fiber Lowered Shock Towers for the Associated B7 and the Schumacher LD3. These lowered towers help reduce the center of gravity on your race buggy to increase corners speed. Here are the highlights – * Made from 4mm thick forged carbon fiber * Lightly chamfered edges to prevent splitting * Designed for high-bite carpet/turf tracks * [...]
Recently announced by Avid Racing is a Direct Drive Pro Kit for the Team Associated B7 race buggy. This slipper eliminator reduces rotating mass and is used to get the most out of your stock class motor while racing. Here are the highlights- * Lightest direct drive unit available today * 6.45 grams with a 72t spur (2.62g with no spur) * Includes [...]
The crew over at Team Associated have announced an Upper Front Wing for the all conquering RC10B7 race buggy. The new front wing is used to help tune the aerodynamics of your buggy. Running a front wing in 10th scale buggy can help plant the front end going into corners, plus it adds a trick look to your B7. The Team [...]
New from the good folks at Team Associated are a bunch of Factory Team Parts for their B7 race buggy kit. The Factory Team upgrades are the some of the same that the Team Associated drivers use on their race buggies to improve durability and speed. Here’s the list- Team Associated Factory Team Upgrades For The B7 #92483 – RC10B7 FT Rear [...]
Over at JConcepts they have announced 6 New Aluminum Upgrades for the mighty Team Associated B7 race buggy. All of the JC aluminum upgrades not only look trick, but can also help improve performance while out on the track. Here’s the highlights- RC10B7 Aluminum Rear Ball-Stud Mount • CNC-machined, aluminum • Standard 3 holes for performance tuning options • Peace of mind performance • Blue [...]
Over at Avid RC they have announced 5.5 x 6mm -1mm Titanium Ball Studs. The negative 1mm ball studs can be used to fine tune handling by changing bump steer, Ackermann, and to adjust roll center/camber gain. Here are the highlights- * Ball is lowered 1mm from the standard AE kit heights * Machined from billet 6Al-4V titanium * Broached with a 2mm [...]
