You are browsing the "RPM" tag archive.
Nothing looks tougher sticking out of a hood than a big intake and blower. Now RPM makes it easy to put one on your car or truck with their mock intake and blower set. The RPM unit is made for scale realism featuring blower belt ridges, pulley splines and recessed butterflies in the scoop. It is easy to install requiring [...]
RPM did not simply re-release an old part with their Gear Cover for the Associated RC10 Classic, they redesigned it from the ground up. The new gear cover for the RC10 is made from molded plastic, which is more durable than the stock part, and also creates a better seal to help keep dirt from getting into the spur/pinion gear area. [...]
Tired of breaking the nerf bars on your 1/10 Traxxas Rally, 2wd Slash LCG, or Slash 4×4? Well RPM has the solution for you, their new nerf bars feature extra webbing and are molded from RPM’s famous engineering grade nylon to take a beating without breaking. The nerf bars are available in two different colors and come with RPM’s limited [...]
RPM has new rear a-arms for the ECX Ruckus/Circuit/Torment. Not only are the RPM arms much stronger than the stock units, but they are also higher performance. The RPM arms are built to tighter tolerances and are 21% lighter than the stock arms. Stronger, plus higher performance, plus lifetime warranty, equals winning! The part number for the rear arms is #70462, [...]
It would be difficult to find a more iconic name for basher parts than RPM RC Products. For years the RPM crew has been making ultra tough plastic parts to give bashers more time driving, and less time wrenching. When you look around the BSRC offices nearly every one of our “personal vehicles” has RPM parts all over it. RPM is [...]
For all you ECX owners, the good folks over at RPM RC have announced Front A-Arms for the Torment, Ruckus, and Circuit. In typical RPM fashion, the new arms were designed for extreme use, built much beefier than that stock units, yet with tighter tolerances to reduce slop. Larger bosses are used in the hinge pins areas to reduce breakage, [...]
“When you speak, RPM listens.”, that’s a direct quote from RPM’s website. RPM had a bunch of requests for Extended Rear Arms for the Traxxas Summit/Revo/E-Revo so they made them for you, the hardcore bashers of the world. The new a-arms are molded out of RPM’s legendary plastic and were designed to keep on ticking even during extreme use. #70432 [...]
RPM RC has announced longer hinge pins for the Associated RC10 Classic. The stock RC10 Classic rear hinge pins are too short for RPM A-arms so the new RPM pins are longer to ensure a proper fit. The part number is 70590, the retail price is $7 per pair, and they should start hitting dealers mid-March. Click Here [...]
RPM RC has come up with mock exhaust tips to give your rc vehicle even more scale realism. Modeled after a full sized 3″ exhaust cut at a 45° angle, the RPM tips are easy to mount and weigh less than 2 grams. The tips come in pairs, one for each side of your vehicle, and come in two different [...]
RPM RC has announced a new, larger sized, bearing blaster. The new unit is called the Mega Bearing Blaster and can handle bearings up to 1.25″ in diameter. That means it can handle the bearings from your 1/5th scale, or even your rollerblade or skateboard. The Mega Bearing Blaster is easy to use and has a part number of #70420. Street [...]
Ever broken off the mounting tabs on your Traxxas VXL-3S speed controller? Yes, we have too. Thankfully the folks over at RPM RC are good at solving such problems. RPM has created a new ESC Cage to make sure you esc stays firmly in place, even if you have an older one with the tabs broken off already. Made from [...]
RPM RC has added a new color option to their lineup of Traxxas rod ends, green. The green rod ends will go great with your Grave Digger, Monster Energy, or Kawasaki themed truck. Or, you might be like Brian and simply like the color green. The part number for the short green rod ends is #80474, while the part [...]
The Associated B44 series of buggies are very fast and a blast to drive. However, they are not very well protected up front. The guys over at RPM have made a Wide Front Bumper to help your B44 take a big front hit. Made out of world famous RPM plastic, their B44 bumper is 5″ wide to offer lots of [...]
When you tag a pipe with a tenth scale 4wd buggy, it is usually at a pretty fast pace, so the beefier your front end the better. Now all you Associated B44/B44.1/B44.2 owners can enjoy the peace of mind that ultra tough RPM A-Arms will bring. Many B44s are used for competition, so while RPM wanted to increase durability, they also [...]
All you Traxxas Summit owners can now rejoice, RPM now has Front A-Arms for your beast. Previously only the right arm from the RPM Revo set would fit properly, now RPM has made a new left arm to really help beef up your Summit. The left front Summit arms become available early next month and are priced at $15. The part [...]
